CLASS RACER FORUM
Page 15 of 31 « First 51314 15 161725 Last »
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Class Racer Builds (https://classracer.com/classforum/forumdisplay.php?f=58)
-   -   Not for Nuthin' But Close! (https://classracer.com/classforum/showthread.php?t=77389)

TGould 12-20-2020 10:29 AM
Re: Not for Nuthin' But Close!
 
Same problem Billy. What version of windows are you running?

Billy Nees 12-20-2020 10:37 AM
Re: Not for Nuthin' But Close!
 
Windows 10

Tom Meyer 12-20-2020 11:10 AM
Re: Not for Nuthin' But Close!
 
Have you done any weight reduction in the car Billy? Of course we have the dirt car striped down, has a 6point cage with door bars that could stop a truck and full containment seat. It weighs about 2300 with a 200 lb driver. What size of rim you running? Tom

Billy Nees 12-20-2020 11:53 AM
Re: Not for Nuthin' But Close!
 
Tom, I haven't even taken the spare tire and jack out of it. To make D/FS it has to weight 2830 with me in it. Well when I weighed it, it weighed 2850. I'm sure that I could get enough out of it to make C/FS if we decide to go in that direction.

Mark Yacavone 12-20-2020 12:28 PM
Re: Not for Nuthin' But Close!
 
Quote:
Originally Posted by Billy Nees (Post 630164)
If I can ever get my computer to let me post pictures again I will.
Email them to me ,and I'll post it. :-)

Marty Knox 12-20-2020 09:19 PM
Re: Not for Nuthin' But Close!
 
Quote:
Originally Posted by RickF (Post 630159)
Would it be feasible to use a stick one of these cars?
The clutch and flywheel must be SFI approved per the NHRA Rulebook.

Mark Yacavone 12-20-2020 09:49 PM
Re: Not for Nuthin' But Close!
 
Quote:
Originally Posted by Marty Knox (Post 630192)
The clutch and flywheel must be SFI approved per the NHRA Rulebook.
"Honest to God" tech now in place ;-)

Mark Yacavone 12-21-2020 12:40 PM
Re: Not for Nuthin' But Close!
 
Quote:
Originally Posted by Billy Nees (Post 630164)
If I can ever get my computer to let me post pictures again I will.
I got it. Get back to work on that header.

https://i.postimg.cc/J0GxtBrd/132098...08270635-n.jpgphoto url

https://i.postimg.cc/T1Vh29yc/132174...35252633-n.jpg

AJ Laferty 12-21-2020 01:08 PM
Re: Not for Nuthin' But Close!
 
EWW. early on i posted a used header for $75...

AJ Laferty 12-21-2020 01:12 PM
Re: Not for Nuthin' But Close!
 
Quote:
Originally Posted by Marty Knox (Post 630192)
The clutch and flywheel must be SFI approved per the NHRA Rulebook.
Isn't that rule for V8, not 4 cyl?


All times are GMT -4. The time now is 04:08 PM.
Page 15 of 31 « First 51314 15 161725 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.