CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Class Racer Builds (https://classracer.com/classforum/forumdisplay.php?f=58)
-   -   H-I-J '76 Nova re-fit. (https://classracer.com/classforum/showthread.php?t=67661)

jcw31 09-29-2019 10:36 AM

Re: H-I-J '76 Nova re-fit.
 
Well 1st- never said she wasnt doing a good job.2nd - never read where she was backing out of it.3rd GEEZ does that mean somebody peed in your cheerios?

MR DERBY CITY 09-29-2019 01:31 PM

Re: H-I-J '76 Nova re-fit.
 
Quote:

Originally Posted by jcw31 (Post 598737)
Is it normal to lose 8 mph between 1/8 and 1/4 ?That just looks wonky.

In all fairness to you, I am still trying to figure out if this is a serious question . perhaps you SHOULD read the entire thread next time.....MJ doesn’t eat Cheerios .....

Nmbr1GMfan 09-29-2019 02:10 PM

Re: H-I-J '76 Nova re-fit.
 
Quote:

Originally Posted by Willyracer (Post 598734)
I tried to attach a screen shot of setup location of record
Selection Don't know if it sent. If not PM your email and I
Can try to send it that way.

Yes, it appears mine is properly set up and I'm pretty sure it said to wire it to a ground source to activate, which we did. Hmmm!

Nmbr1GMfan 09-29-2019 02:19 PM

Re: H-I-J '76 Nova re-fit.
 
Quote:

Originally Posted by jcw31 (Post 598737)
Is it normal to lose 8 mph between 1/8 and 1/4 ?That just looks wonky.

Quote:

Originally Posted by Nmbr1GMfan (Post 598695)
(far left timeslip is Indy the rest were last night, we only ran 1/8)

We only ran 1/8 as I stated in an earlier post. Car doesn't pull through the back half well at all but it will gain mph, we're working on that.

FireSale 09-29-2019 02:25 PM

Re: H-I-J '76 Nova re-fit.
 
Quote:

Originally Posted by Nmbr1GMfan (Post 598754)
Yes, it appears mine is properly set up and I'm pretty sure it said to wire it to a ground source to activate, which we did. Hmmm!


Are you using the supplied switch with the kit or your own for activation? There seems to be slightly different wiring if you are using your own switch to trigger record. I'm kind of following along here with a manual, so forgive me if I'm off.

Nmbr1GMfan 09-29-2019 02:32 PM

Re: H-I-J '76 Nova re-fit.
 
Quote:

Originally Posted by FireSale (Post 598756)
Are you using the supplied switch with the kit or your own for activation? There seems to be slightly different wiring if you are using your own switch to trigger record. I'm kind of following along here with a manual, so forgive me if I'm off.

I used the supplied Racepak switch, wired to ground, checked with a simple test light for functionality. I'm sure I missed something and there will be an "Ahh Haaa" moment at some point.

Willyracer 09-29-2019 08:33 PM

Re: H-I-J '76 Nova re-fit.
 
I might be misunderstaning but how did you test
With the light. The input is taken to ground.
Or did you mean you tested the switch only . I would make
A long jumper and temp short it to the battery neg post
Once removed the racepak led should start flashing (recording)
If it doesn't start recording I would check the 12v and neg wires
Going into the recorder.
The simple things are always the hardest to find.
Lol

Nmbr1GMfan 09-29-2019 09:19 PM

Re: H-I-J '76 Nova re-fit.
 
Quote:

Originally Posted by Willyracer (Post 598778)
I might be misunderstaning but how did you test
With the light. The input is taken to ground.
Or did you mean you tested the switch only . I would make
A long jumper and temp short it to the battery neg post
Once removed the racepak led should start flashing (recording)
If it doesn't start recording I would check the 12v and neg wires
Going into the recorder.
The simple things are always the hardest to find.
Lol

I clamped the test light wire to positive and stuck the "record wire", when I push the button the test light lights indicating ground. Also, I'll assume when the ignition is cut after the finish line it will stop recording when I get this sorted out? Now it records till I shut it off in the program.

Willyracer 09-29-2019 09:36 PM

Re: H-I-J '76 Nova re-fit.
 
I have are wired like this:
The red wire (C position) is connected to the ignition
"on" wire When the ignition is turned off the racepak
Is power down. You can set it up to stop recording when
Rpm drops below a set point for a set time amount

pfordamx 09-30-2019 11:13 AM

Re: H-I-J '76 Nova re-fit.
 
off topic a little i'm not familier with racepak but your 1/8th mile et shows low 11 second potential which would put you comfortably under your index if you can figure out why its falling over in high.


All times are GMT -4. The time now is 10:44 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.