CLASS RACER FORUM - Nova stocker project.

CLASS RACER FORUM (https://classracer.com/classforum/index.php)

- Class Racer Builds (https://classracer.com/classforum/forumdisplay.php?f=58)

- - Nova stocker project. (https://classracer.com/classforum/showthread.php?t=50790)

Re: Nova stocker project.

Quote:

Originally Posted by Sean Marconette (Post 602346)

Alan, Good luck during the off-season! No rest for those in a performance based category, as there is always something to improve on or look at.
Sean

Sean, congrats on setting the SS/N National Record at Kearney! Doing it with a 4 cyl. turbocharged combo is impressive, to say the least. :) -Al

Re: Nova stocker project.

Allan,

When the 327 out of my '68 Camaro was torn down for a refresh the cam looked like yours, eat up pretty bad on both sides of the lobes. The Schubecks didn't show any kind of wear as usual. It only had 170lbs on the seat and always had Gibbs oil in it. I was going to buy a billet replacement but there was a backlog on them at that time so I put a cast back in it. The car and motor are gone not sure what it will look like at the next teardown. My engine guy was puzzled as to what actually caused this condition.

Jimmy

Re: Nova stocker project.

Quote:

Originally Posted by Alan Nyhus (Post 602363)

Sean, congrats on setting the SS/N National Record at Kearney! Doing it with a 4 cyl. turbocharged combo is impressive, to say the least. :) -Al

Thanks Alan!! Setting a record has been on my bucket list since getting into class racing.

Sean

Re: Nova stocker project.

Quote:

Originally Posted by jimmyparker (Post 602365)

Alan, When the 327 out of my '68 Camaro was torn down for a refresh the cam looked like yours, eat up pretty bad on both sides of the lobes. The Schubecks didn't show any kind of wear as usual. It only had 170lbs on the seat and always had Gibbs oil in it. I was going to buy a billet replacement but there was a backlog on them at that time so I put a cast back in it. The car and motor are gone not sure what it will look like at the next teardown. My engine guy was puzzled as to what actually caused this condition. Jimmy

Hi Jimmy. This cam had over 200 runs on it. It was nitrided, broken in with light springs and oil used was either Valvoline VR1 10w30 or Redline 5w20. Lifters were uncoated Trend w/o an oil hole. I'm not sure if more or less lash would make a difference or not. I'm not unhappy with the life of the cam, though. Short of going with a billet or 8620 cam core, there's not much else to be done.

Trend polished and recrowned the lifters. I just can't bring myself to put ceramic faced lifters in the thing....

Good to hear from you, hope all is well. -Al

Re: Nova stocker project.

Got everything back from Matt Steen's Victory Engines in Marshall, Mn. and started going back together.

Matt and Jason Verke are precision machinists that specialize in Stock and Super Stock engines, cylinder heads and intakes. They work on a one-on-one basis with each customer and are professionally confidential with your project.

Matt Steen (left) and Jason Verke (rt):

https://i.imgur.com/Ct3HG5Vl.jpg

Matt's SS/K '66 Valiant 273 is a familiar sight at NHRA Division 5 and Midwest Class Racers events. To take an obscure combination like this and make it run hard gives a little insight to Matt's intellect and work ethic:

https://i.imgur.com/oaj2BsAl.jpg

Jason is a true artist on heads. He knows what works and is constantly tweaking. No cookie cutter head work, here!

https://i.imgur.com/l057jbVl.jpg

Re: Nova stocker project.

Wow, I bet Matt gave you quite a discount for all that glowing publicity!!
:D:D:D

Re: Nova stocker project.

Curious as to what kind of power that 327 makes,
and to jumble up the numbers a bit, that 273?

Re: Nova stocker project.

Quote:

Originally Posted by Paul Merolla (Post 604541)

Wow, I bet Matt gave you quite a discount for all that glowing publicity!!:D:D:D

Now, Paul....you know better than that! :D -Al

Re: Nova stocker project.

Quote:

Originally Posted by Mark Yacavone (Post 604549)

Curious as to what kind of power that 327 makes,
and to jumble up the numbers a bit, that 273?

Mark, Matt's been low 10-teens in SS/K (2,900 lbs) in decent air. -Al

Re: Nova stocker project.