CLASS RACER FORUM
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Class Racer Builds (https://classracer.com/classforum/forumdisplay.php?f=58)
-   -   67 Cuda O/SA (https://classracer.com/classforum/showthread.php?t=67163)

Dwight Southerland 08-13-2017 03:02 PM
Re: 67 Cuda O/SA
 
The only O/SA combination I see is a '68 318 2-bbl.

David Lee 08-13-2017 03:55 PM
Re: 67 Cuda O/SA
 
that is correct, i am converting this 67 to a 68

joe huestis 08-13-2017 04:53 PM
Re: 67 Cuda O/SA
 
Possible Q/R combo with 273-2V . 17.64 factor according to Dwight's website as a '67. Now that would be sweet !

David Lee 08-13-2017 05:21 PM
Re: 67 Cuda O/SA
 
i was thinking about that combo too, but the 273 blocks I have found have been too thin to build a good engine on. But if I find some, I guess I could build that combo,

James L Miller 08-13-2017 07:16 PM
Re: 67 Cuda O/SA
 
Quote:
Originally Posted by David Lee (Post 541637)
i was thinking about that combo too, but the 273 blocks I have found have been too thin to build a good engine on. But if I find some, I guess I could build that combo,
I guess if you can find an R3 block, then the 318 ought to have nice thick cylinder walls. The only ones that seem available are the short deck versions. I'm going to build a 273-2bbl and do a half fill with Hard Blok and hope that works. It will take a while before I get it ready to dyno.


All times are GMT -4. The time now is 09:44 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.