CLASS RACER FORUM
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Small runner intake gaskets (https://classracer.com/classforum/showthread.php?t=88885)

Jrh5220 01-25-2025 06:20 PM
Re: Small runner intake gaskets
 
You can make your own with 1290 fel pro.

STK1217 01-27-2025 07:30 PM
Re: Small runner intake gaskets
 
MS 9200B Felpro I just had to use a set on a 1956 Corvette 265 intake. Off the top of my head they are 1.800 h and 1.095 w ?

Ed McLawhorn Jr. 01-27-2025 11:03 PM
Re: Small runner intake gaskets
 
Quote:
Originally Posted by STK1217 (Post 708659)
MS 9200B Felpro I just had to use a set on a 1956 Corvette 265 intake. Off the top of my head they are 1.800 h and 1.095 w ?
Thanks.

Jeff Stout 01-28-2025 12:21 PM
Re: Small runner intake gaskets
 
Ed, I bought a shop out and have several sbc gaskets from different companies. I will look today for any. The 1.8x1.92 is approximate size?

Jrh5220 01-28-2025 12:47 PM
Re: Small runner intake gaskets
 
Quote:
Originally Posted by Ed McLawhorn Jr. (Post 708077)
Need recommendations for sbc small port intake gaskets. Specifically for 520 super stock port. I was using Mr. Gasket 100's and cutting for fit. No issues until they seem to be out of stock or discontinued. I can buy gasket material and cut one out, but was hoping for something close and minimize cut to fit. Thanks.

Ed
us the 1290 felpro.


All times are GMT -4. The time now is 02:55 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.