CLASS RACER FORUM
Page 26 of 199 « First 162425 26 27283676126 Last »
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Class Racer Builds (https://classracer.com/classforum/forumdisplay.php?f=58)
-   -   H-I-J '76 Nova re-fit. (https://classracer.com/classforum/showthread.php?t=67661)

Nmbr1GMfan 04-08-2018 10:56 PM
Re: H-I-J '76 Nova re-fit.
 
Quote:
Originally Posted by Rod Greene (Post 560176)
I have been following this build. It is very inspiring. I have a couple of questions, is Darren still in Ca and did you use SEM paint for your interior panels? Keep up the great work. I love stick cars.
Thanks Rod, Yes Darren is in CA. We used DupliColor adhesion promoter primer then DupliColor vinyl and fabric flat black. Seems to spray good and is real tough.

Pistol Pete 04-09-2018 09:18 AM
Re: H-I-J '76 Nova re-fit.
 
Looking Good Todd....

Nmbr1GMfan 04-09-2018 12:24 PM
Re: H-I-J '76 Nova re-fit.
 
Quote:
Originally Posted by Pistol Pete (Post 560191)
Looking Good Todd....
Thanks, Pete. And thanks for coming to see me a couple weeks ago.

Alan Nyhus 04-09-2018 07:43 PM
Re: H-I-J '76 Nova re-fit.
 
Todd, there are some new dash pads on ebay. -Al

Nmbr1GMfan 04-10-2018 09:08 AM
Re: H-I-J '76 Nova re-fit.
 
Quote:
Originally Posted by Alan Nyhus (Post 560243)
Todd, there are some new dash pads on ebay. -Al
Thanks Alan, I looked over the weekend and saw two used ones, musta missed them. I'll circle back and see if I can find them.

Devo 04-10-2018 11:06 AM
Re: H-I-J '76 Nova re-fit.
 
Todd,
I re-covered my '66 dash pad with a piece of marine vinyl from the local fabric store. Some spray adhesive and about an hour labor ended up costing me about $20. It even came out looking half-way decent!
Good luck on the build.
dEv0 Don.

Nmbr1GMfan 04-10-2018 11:12 AM
Re: H-I-J '76 Nova re-fit.
 
Quote:
Originally Posted by Devo (Post 560287)
Todd,
I re-covered my '66 dash pad with a piece of marine vinyl from the local fabric store. Some spray adhesive and about an hour labor ended up costing me about $20. It even came out looking half-way decent!
Good luck on the build.
dEv0 Don.
Thanks Don, This pad has a massive bolt hole in it, I can fill it and cover it but in the end I'm holding out hope to find a better used one. I may however have to go your route.

Devo 04-10-2018 11:46 AM
Re: H-I-J '76 Nova re-fit.
 
Quote:
Originally Posted by Nmbr1GMfan (Post 560289)
Thanks Don, This pad has a massive bolt hole in it, I can fill it and cover it but in the end I'm holding out hope to find a better used one. I may however have to go your route.
Mine had huge cracks on it so I shaved them down, then covered the cracks with duct tape to smooth it out before I covered it.

Nmbr1GMfan 04-10-2018 04:51 PM
Re: H-I-J '76 Nova re-fit.
 
Quote:
Originally Posted by Devo (Post 560293)
Mine had huge cracks on it so I shaved them down, then covered the cracks with duct tape to smooth it out before I covered it.
Thats a good idea.

Nmbr1GMfan 04-10-2018 04:53 PM
Re: H-I-J '76 Nova re-fit.
 
Didn't post any photos of the headers after I had them in my hands.
https://i.imgur.com/VgA32uX.jpg
https://i.imgur.com/6iTByhA.jpg


All times are GMT -4. The time now is 11:34 PM.
Page 26 of 199 « First 162425 26 27283676126 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.