CLASS RACER FORUM
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   .90 Heads Up Class Racing (https://classracer.com/classforum/forumdisplay.php?f=6)
-   -   Finish Line Beam Height (https://classracer.com/classforum/showthread.php?t=20001)

wsmracing 09-09-2009 11:33 AM
Re: Finish Line Beam Height
 
wheels may bounce a little , but body panels change / distort as to downforce........look at a lot of door cars....they have that flat black tab hanging down there some where to trip the lights............whats the maxium forward distance from the spindle.....? 30 or 33 inches ..or something like that

Chris Williams 09-09-2009 12:53 PM
Re: Finish Line Beam Height
 
Quote:
Originally Posted by wsmracing (Post 139538)
wheels may bounce a little , but body panels change / distort as to downforce........look at a lot of door cars....they have that flat black tab hanging down there some where to trip the lights............whats the maxium forward distance from the spindle.....? 30 or 33 inches ..or something like that
30 inches.

billy leber 09-09-2009 01:43 PM
Re: Finish Line Beam Height
 
i wish stock and super stock could hang a tab to take the beam consistantly but its not allowed. senseless rule,every other class can. i hate hitting the brakes and going faster! did it at indy.

sg1899 09-09-2009 03:50 PM
Re: Finish Line Beam Height
 
Billy put in a BIGGER brake pedal EDDY

billy leber 09-09-2009 05:10 PM
Re: Finish Line Beam Height
 
if i would not have hit the brakes id have been ok!


All times are GMT -4. The time now is 12:34 AM.
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.