CLASS RACER FORUM
Page 3 of 4 12 3 4
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Class Racer Builds (https://classracer.com/classforum/forumdisplay.php?f=58)
-   -   Pure stock cutlass build up (https://classracer.com/classforum/showthread.php?t=53141)

Tod Lane 05-21-2014 12:14 PM
Re: Pure stock cutlass build up
 
Quote:
Originally Posted by kellintrans (Post 432246)
Yeah, I remember that car. I also remember Linda Vaughn posing with it on the cover of Hot Rod magazine back in the early '80's...
There was a car in that picture?
Are you sure?

kellintrans 05-21-2014 06:12 PM
Re: Pure stock cutlass build up
 
Quote:
Originally Posted by Tod Lane (Post 432291)
There was a car in that picture?
Are you sure?
I think so...LOL, I know she was wearing a red jumpsuit, and that definitely caught my teenage attention.

kellintrans 12-01-2015 11:21 AM
Re: Pure stock cutlass build up
 
1 Attachment(s)
I have finally been able to get back to work on project "Olds School". I was delayed for 2015 due to the usual life stuff, but while I was sidelined, I collected all the junk needed for my project. I also got the combo ok'd by Mike Baker. My goal is to run it as a Pure Stocker at a couple of IHRA division 1 races in 2016.

I have built the rear (7.5" 4.10 gears) & trans (metric 200c), and will be freshening the motor this winter. I will do the paint and body work when it gets closer to spring.

Any cheap suspension tips. I believe, according to the rule book, I have to keep the front sway bar. Does it have to be connected? Any tips or info is greatly appreciated.

Dan Fahey 12-01-2015 12:07 PM
Re: Pure stock cutlass build up
 
Quote:
Originally Posted by kellintrans (Post 489115)
I have finally been able to get back to work on project "Olds School". I was delayed for 2015 due to the usual life stuff, but while I was sidelined, I collected all the junk needed for my project. I also got the combo ok'd by Mike Baker. My goal is to run it as a Pure Stocker at a couple of IHRA division 1 races in 2016.

I have built the rear (7.5" 4.10 gears) & trans (metric 200c), and will be freshening the motor this winter. I will do the paint and body work when it gets closer to spring.

Any cheap suspension tips. I believe, according to the rule book, I have to keep the front sway bar. Does it have to be connected? Any tips or info is greatly appreciated.

Dick Miller has all the trick stuff for your suspension.
Especially the Brace which attaches the upper and lower control arms.
An inexpensive upgrade; hardened bushings on the control arms.
The stock ones will break down racing.
Add Airbags.. They make a difference!
Keep the rear sway bar.
Otherwise you OTW ..

BTW what Class are you running in?

Dan

kellintrans 12-01-2015 12:24 PM
Re: Pure stock cutlass build up
 
I am running in I/PS.

Keith 944 12-01-2015 04:06 PM
Re: Pure stock cutlass build up
 
I too live in Middletown. glad to see the build back under way. I hope ihra has an event at capitol or Delmar this season, they seem to forget div1 is meant to be (northeast) div. I guess I will see you at mdir or Richmond dragway, good luck with the build!

Dan Fahey 12-01-2015 06:25 PM
Re: Pure stock cutlass build up
 
Quote:
Originally Posted by kellintrans (Post 489125)
I am running in I/PS.
FWIW been recommending Bullet Cams to anyone needing a proper IHRA Legal Pure Stocker Cam.

Contact John at Bullet.
He works with Mike Baker at IHR making sure we get the right product.

What are you planning to run as a rear tire?

Dan

kellintrans 12-01-2015 10:35 PM
Re: Pure stock cutlass build up
 
Quote:
Originally Posted by Keith 944 (Post 489154)
I too live in Middletown. glad to see the build back under way. I hope ihra has an event at capitol or Delmar this season, they seem to forget div1 is meant to be (northeast) div. I guess I will see you at mdir or Richmond dragway, good luck with the build!
It would be nice. Why is Delmar considered a Division 3 track?

kellintrans 12-01-2015 10:43 PM
Re: Pure stock cutlass build up
 
Quote:
Originally Posted by Dan Fahey (Post 489165)
FWIW been recommending Bullet Cams to anyone needing a proper IHRA Legal Pure Stocker Cam.

Contact John at Bullet.
He works with Mike Baker at IHR making sure we get the right product.

What are you planning to run as a rear tire?

Dan
I am running Mickey Thompson drag radials. I forget the exact size, but they are about 26x14x8.

Keith 944 12-02-2015 09:33 AM
Re: Pure stock cutlass build up
 
Quote:
Originally Posted by kellintrans (Post 489192)
It would be nice. Why is Delmar considered a Division 3 track?
That was their choice for what the racers wanted for the bracket finals. It would be a d1 race for pro-am if it ever happens


All times are GMT -4. The time now is 11:14 PM.
Page 3 of 4 12 3 4
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.