CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Class Racer Builds (https://classracer.com/classforum/forumdisplay.php?f=58)
-   -   1967 Fairlane Super Stock (https://classracer.com/classforum/showthread.php?t=46383)

cobrajet2 11-12-2015 11:51 PM

Re: 1967 Fairlane Super Stock
 
Rusty,
Do you think you will finally get to race your Fairlane in 2016? Been a long time coming. Any updates? Going to start on my Fairlane Wagon over the Winter.

Mike

Rusty Gillis 11-13-2015 10:54 AM

Re: 1967 Fairlane Super Stock
 
Quote:

Originally Posted by cobrajet2 (Post 487833)
Rusty,
Do you think you will finally get to race your Fairlane in 2016? Been a long time coming. Any updates? Going to start on my Fairlane Wagon over the Winter.

Mike

I would like to race it at the NMCA race in Bradenton next year if possible. It's sitting in storage at this time. My problem is time and money.

Rusty Gillis 12-12-2015 02:50 PM

Re: 1967 Fairlane Super Stock
 
At this time I have decided to put together a 428 from a lot of the left over parts I have and race the Fairlane in Nostalgia Super Stock at NMCA events. I can always build an NHRA legal SS engine at a later date.

http://img.photobucket.com/albums/v3...psbilm2zqx.jpg

HandOverFist 12-12-2015 04:02 PM

Re: 1967 Fairlane Super Stock
 
You will have a blast with NMCA Rusty. :) You might even consider the Nostalgia Muscle car class.

Rusty Gillis 12-12-2015 09:14 PM

Re: 1967 Fairlane Super Stock
 
I still need a few parts but I have a few new parts: JPT converter and C4 for an FE, strange center section with a 4:86 and 35 spline spool and Hooker race headers.

Cole Quintin 12-12-2015 09:35 PM

Re: 1967 Fairlane Super Stock
 
Doing a Great Job on the build so far!

Rusty Gillis 12-13-2015 02:17 PM

Re: 1967 Fairlane Super Stock
 
A friend of mine gave me the 9" rear and I think it came out of a Bronco. It is very hard to get the slicks to clear the 2" studs so to make it easier to install we are going to narrow the rear 1.25". That will center the 10.5" slick when I get a new set in the center of the wheel well.

http://img.photobucket.com/albums/v3...pstshi1x3t.jpg

The Wilwood brakes I have are for the late big Ford housing so we will install a set of Strange housing ends.

http://img.photobucket.com/albums/v3...pslkvkxtqj.jpg

http://img.photobucket.com/albums/v3...psofjszsa0.jpg

The battery cable runs along the frame rail. There is more clearance than the photo shows.

http://img.photobucket.com/albums/v3...psyhuf1qml.jpg

cobrajet2 02-25-2016 04:45 PM

Re: 1967 Fairlane Super Stock
 
Any new updates, Rusty?

Rusty Gillis 02-29-2016 09:08 PM

Re: 1967 Fairlane Super Stock
 
Quote:

Originally Posted by cobrajet2 (Post 496893)
Any new updates, Rusty?

I've had issues at the shop that have kept this on hold. I had planned on at the start of the year to get serious and my painter/bodyman decides not to come back to work after Christmas so now I'm back to bodywork and paint. He was young and doing a good job. I have had a hard time finding someone up to our standards. Saturday I was going to meet with my engine builder and I had to cancel because I have a bad case of the flu. I did get the rear end out to narrow and found out the axle tubes are the same length so I'm not sure if we will modify this one or start with a new housing. Sorry for all the bad news now for some good Steve Baur the editor of Fastest Street Car Magazine is going to feature the engine build in his magazine. We will be building a stroker FE using one of my 428 blocks for the build.

Rusty Gillis 06-18-2016 05:27 PM

Re: 1967 Fairlane Super Stock
 
After measuring the rear that was in the Fairlane I found out the pinnon was not in the center. I had a rear out of a 1963 Galaxie that we started to narrow years ago but for some reason never finished. I measured it and once Brian welds the Strange late Ford housing ends it will be perfect for the Fairlane.

I ordered a back brace and heavy duty spring perches from Jeg's and Brian started fitting and welding today.

http://img.photobucket.com/albums/v3...psaoj4suww.jpg

http://img.photobucket.com/albums/v3...psgru0aesm.jpg

http://img.photobucket.com/albums/v3...pstrmg4xok.jpg

Next week Brian will finish welding.

Rusty Gillis 06-20-2016 01:21 PM

Re: 1967 Fairlane Super Stock
 
Brian finished welding the spring perches

http://img.photobucket.com/albums/v3...psgdr9tc6t.jpg

Welding the Strange late Ford housing ends

http://img.photobucket.com/albums/v3...psdnycym3h.jpg

http://img.photobucket.com/albums/v3...psyjibxqcw.jpg

http://img.photobucket.com/albums/v3...ps3lctoftj.jpg

Rusty Gillis 06-22-2016 01:51 PM

Re: 1967 Fairlane Super Stock
 
Ready for epoxy

http://img.photobucket.com/albums/v3...pstq0yge3b.jpg

Two coats of SPI black epoxy. I'm going to wait about an hour and turn it over again and spray a third coat.

http://img.photobucket.com/albums/v3...psmvw2fvko.jpg

Rusty Gillis 02-07-2018 08:42 PM

Re: 1967 Fairlane Super Stock
 
I sold the Fairlane to a friend of mine and he will be picking it up Saturday. It won't be far away and is getting a Blair Patrick 520" engine and C6. It will be a street legal race car.

http://img.photobucket.com/albums/v3...psyz8vdvpk.jpg

http://img.photobucket.com/albums/v3...ps13mg4nuy.jpg

http://img.photobucket.com/albums/v3...psap0u9j2x.jpg

Dwight Southerland 02-08-2018 07:42 AM

Re: 1967 Fairlane Super Stock
 
:mad: Booo!

Rusty Gillis 02-08-2018 01:38 PM

Re: 1967 Fairlane Super Stock
 
Quote:

Originally Posted by Dwight Southerland (Post 555475)
:mad: Booo!

I was sad at first but it's going to a good home and he said I could make a pass in it. The good news I will have some extra money to buy parts I need to update the Mustang so I can start racing it in B/SA. I want to get new wheels and tires and a few other things.


http://img.photobucket.com/albums/v3...psiilmqgeu.jpg

Dwight Southerland 02-08-2018 04:34 PM

Re: 1967 Fairlane Super Stock
 
I was really looking forward to the SS combination! Those 66-7 Fairlanes and Comets are one of my favorite FoMoCo body styles and I think the 427 medium riser is slightly underrated for its potential.

But, I'm glad the B/SA car is coming!

Rusty Gillis 02-09-2018 08:31 PM

Re: 1967 Fairlane Super Stock
 
520" Blair Patrick engine going in Fairlane.

http://img.photobucket.com/albums/v3...shqjkf4cd.jpeg

http://img.photobucket.com/albums/v3...sste3d083.jpeg

Rusty Gillis 02-10-2018 07:27 PM

Re: 1967 Fairlane Super Stock
 
http://img.photobucket.com/albums/v3...ps4dh9tqnz.jpg

http://img.photobucket.com/albums/v3...sxrtwzdif.jpeg

btrc 02-11-2018 09:10 AM

Re: 1967 Fairlane Super Stock
 
What fuel injection does it have?

S/ST J718 02-20-2018 09:09 PM

Re: 1967 Fairlane Super Stock
 
Sorry to see it end like that, but the stang will love the attention for sure...

Rusty Gillis 02-21-2018 09:12 AM

Re: 1967 Fairlane Super Stock
 
Quote:

Originally Posted by btrc (Post 555751)
What fuel injection does it have?

Fast

Rusty Gillis 02-21-2018 09:15 AM

Re: 1967 Fairlane Super Stock
 
I believe this year he will be using a carb and next year upgrade to fuel injection. He also has two turbo's for it.

Rusty Gillis 02-26-2018 09:42 AM

Re: 1967 Fairlane Super Stock
 
Test fit the old original 390 out of my Mustang into the Fairlane, The oil pan was a slight issue but the pan on the BP427 has a little more clearance in that area. Not use to having a car this nice ! it makes it harder to work on ! And I rolled out the tires I have for the Fairlane.

http://img.photobucket.com/albums/v3...psuz6ovzpp.jpg

http://img.photobucket.com/albums/v3...psi8y27bqs.jpg

http://img.photobucket.com/albums/v3...psgfxkchyo.jpg

Project for next year

http://img.photobucket.com/albums/v3...pshqchvo8w.jpg

Rusty Gillis 06-03-2019 01:57 PM

Re: 1967 Fairlane Super Stock
 
You would never guess this sleeper has twin turbos.

https://img.photobucket.com/albums/v...psngouzlkm.jpg

https://img.photobucket.com/albums/v...ps5weyyslr.jpg

https://img.photobucket.com/albums/v...pseqgcr9ad.jpg


All times are GMT -4. The time now is 08:00 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.