CLASS RACER FORUM
Page 5 of 5 « First 34 5
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Class Racer Builds (https://classracer.com/classforum/forumdisplay.php?f=58)
-   -   AMC Stocker suggestions (https://classracer.com/classforum/showthread.php?t=71157)

Mark Yacavone 05-18-2019 01:06 PM
Re: AMC Stocker suggestions
 
Quote:
Originally Posted by pfordamx (Post 588715)
didn't there used to be a cam lift rule that allowed all cars under x amount of lift to go use x amount of lift.
No.
Just FWD and stock trucks are allowed .430 lift or factory, if greater.
That lift difference is negligible. If you're doing good, you can get all you're allowed at the valve. Somebody might have a .400 lift cam that you could roll and see how it comes up.

pfordamx 05-20-2019 06:48 PM
Re: AMC Stocker suggestions
 
if they check lift at the retainer than do you calculate for lash when ordering a cam since everyone is allowed solid lifters now and roller rockers if you lash the cam at .016 would your order a .426 lift cam instead of a .410 to try to get all of it because there not worried about the cam card just lift at the retainer?

Billy Nees 05-20-2019 06:49 PM
Re: AMC Stocker suggestions
 
Quote:
Originally Posted by pfordamx (Post 588915)
if they check lift at the retainer than do you calculate for lash when ordering a cam since everyone is allowed solid lifters now and roller rockers if you lash the cam at .016 would your order a .426 lift cam instead of a .410 to try to get all of it because there not worried about the cam card just lift at the retainer?
Cams are checked with zero lash.


All times are GMT -4. The time now is 04:21 AM.
Page 5 of 5 « First 34 5
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.