CLASS RACER FORUM
Page 6 of 10 « First 45 6 78 Last »
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Class Racer Builds (https://classracer.com/classforum/forumdisplay.php?f=58)
-   -   302 Chevrolet Engine Build (https://classracer.com/classforum/showthread.php?t=70688)

Mark Yacavone 11-16-2018 01:25 PM
Re: 302 Chevrolet Engine Build
 
Larry, Do you have this type of equipment at your place? I know you do a lot of your own work.

Larry Hill 11-17-2018 02:42 PM
Re: 302 Chevrolet Engine Build
 
Yes I have owned a Diesel machine shop. Built toy airplane engines with Harry Paul Tune and burnt Drums of nitro every toy airplane season. If we wanted to go fast with the toy airplanes, we would use laboratory grade nitro, its clear without yellow die.

HP HUNTER 11-17-2018 08:42 PM
Re: 302 Chevrolet Engine Build
 
1 Attachment(s)
Quote:
Originally Posted by MIKE JONES 302 (Post 577062)
I turn the block 180 degrees to keep the mandrel tru. I adjust oil flow to slow down the honing rate. The 3 center mains can not be over stroked, they hone faster than 1 and 2 mains. I do use a truing sleeve on the rod hone mandrels, but I've never seen a truing sleeve for a line hone mandrel, but I just started machining. Could you post up an image of a "Line hone mandrel truing sleeve" Thanks
Here you go Mike LOL

MIKE JONES 302 09-07-2019 10:03 PM
Re: 302 Chevrolet Engine Build
 
1 Attachment(s)
I got the pistons last week, Icon .040 -12.7 CC dome, they came in at 712 grams with pin after some work.

monte385 09-07-2019 10:33 PM
Re: 302 Chevrolet Engine Build
 
I have a feeling you've had a pretty good teacher during your life.;)

dc1320Fan 09-07-2019 11:26 PM
Re: 302 Chevrolet Engine Build
 
It is very encouraging to see a person of Mike's age using his head and hands to do something that he is interested in. He not only has had good instruction but is obviously receptive to learning all he can. Not easily found in young workers today. I see a bright future ahead for you Mike.

MIKE JONES 302 09-08-2019 09:47 AM
Re: 302 Chevrolet Engine Build
 
6 Attachment(s)
The finished piston. Some more pictures of sizing the wrist pins, size was set at .0008. I have to drill and tap the crank snout next and have the crank flange cut, then I can balance the assembly. My dad will hone the block then I can assemble the short block.

MIKE JONES 302 10-26-2019 10:06 PM
Re: 302 Chevrolet Engine Build
 
1 Attachment(s)
I got this for my Birthday, the 302 will go in this until I build a 427 for F/SA.

Larry Hill 10-27-2019 07:19 AM
Re: 302 Chevrolet Engine Build
 
You'r going to need a bigger trailer!

Makinchips 10-28-2019 03:26 PM
Re: 302 Chevrolet Engine Build
 
Safety glasses on??


All times are GMT -4. The time now is 01:09 AM.
Page 6 of 10 « First 45 6 78 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.