CLASS RACER FORUM
Page 8 of 10 « First 67 8 910
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Nostalgia Stock and Super Stock (https://classracer.com/classforum/forumdisplay.php?f=54)
-   -   Old Race Parts and Pieces (https://classracer.com/classforum/showthread.php?t=39269)

Hemi Moose 05-10-2012 10:25 PM
Re: Old Race Parts and Pieces
 
Quote:
Originally Posted by James L Miller (Post 325797)
Would that be called A MAXIMUM Maximum Wedge, or an ULTIMATE Maximum Wedge? Maybe if two 4bbl carbs is good, then four ought to be killer? They probably couldn't get that much air flow into the cylinders anyway.
Actually I think it might of worked if they ran the 13.5:1 or higher compression and had longer intake runners on the Max-Wedge intake...running four 500 cfm carbs = 2000 cfm...running four 750 cfm carbs = 3000 cfm, and maybe bore & stroke it...If you think about it wouldn't be that much more different that a big cube Pro-Stock motor with two big dominators on top of a tunnel-ram.

Hemi Moose 06-02-2012 07:01 PM
Re: Old Race Parts and Pieces
 
Quote:
Originally Posted by James L Miller (Post 317385)
Christmas at Nichels Engineering. Maybe it wasn't Christmas, but sure looks like it.

http://classracer.com/classforum/att...0&d=1332611370
Found another old shot from the K&K Insurance team...check out the motor mounts.

http://1.bp.blogspot.com/-QfA3Ao-q5G...to+install.jpg

IvanP 06-23-2012 10:23 AM
Re: Old Race Parts and Pieces
 
Quote:
Originally Posted by James L Miller (Post 325263)
421 Super Duty Pontiac exhaust manifold. I took this at the 50th Anniversary race at Indy.
Does anyone know how many of these exotic manifolds were made?

Charlie A 06-23-2012 07:33 PM
Re: Old Race Parts and Pieces
 
New challenge:

Liteweight 06-23-2012 10:25 PM
Re: Old Race Parts and Pieces
 
Ardun ?

liteweight

Charlie A 06-24-2012 07:51 AM
Re: Old Race Parts and Pieces
 
You clicked on the picture, didn't you?

James L Miller 06-24-2012 09:43 AM
Re: Old Race Parts and Pieces
 
I think the spark plug tube spacing makes it obvious. I don't know of another head that the plugs are paired like that. The newer Chrysler Hemi heads like the PS and PST heads have the center cylinders paired together and the ends spread apart.

Liteweight 06-24-2012 05:24 PM
Re: Old Race Parts and Pieces
 
Quote:
Originally Posted by Charlie A (Post 332522)
You clicked on the picture, didn't you?
Nope. It was a quess. Looked at the tube spacing & valve cover attatchment. Couldn't have been any production Hemi

liteweight

Charlie A 06-24-2012 07:25 PM
Re: Old Race Parts and Pieces
 
Next:

http://forums.aaca.org/attachments/f...1ga-12127a.jpg

Charlie A 06-25-2012 12:47 PM
Re: Old Race Parts and Pieces
 
Quote:
Originally Posted by Liteweight (Post 332497)
Ardun ?

liteweight
Just kiddin'. Hemi pros would fugure that one quickly.

Now, scratch your head on the newest pic I found.


All times are GMT -4. The time now is 11:22 AM.
Page 8 of 10 « First 67 8 910
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.