CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Class Racer Builds (https://classracer.com/classforum/forumdisplay.php?f=58)
-   -   Nova stocker project. (https://classracer.com/classforum/showthread.php?t=50790)

HandOverFist 04-17-2014 09:44 AM

Re: Nova stocker project.
 
Quote:

Originally Posted by Alan Nyhus (Post 428173)
Just an update: It runs, moves under it's own power, the oil and water stays in the motor and none of the wiring went up in smoke. Also upgraded the driveshaft to a chome moly unit with 1350 series yokes and joints. It's off to the alignment shop next week. -Al

Looking forward to seeing it go down the track Alan. :)

Alan Nyhus 04-22-2014 10:56 PM

Re: Nova stocker project.
 
Back from alignment...front tires pointing where they're supposed to:

http://img.photobucket.com/albums/v4...ps04f71fa5.jpg

HandOverFist 04-22-2014 11:07 PM

Re: Nova stocker project.
 
Get it down the track Alan...one of us has to succeed lol! :D

Kelly Petterson 04-26-2014 03:35 PM

Re: Nova stocker project.
 
Like!

Quote:

Originally Posted by alan nyhus (Post 428831)
back from alignment...front tires pointing where they're supposed to:

http://img.photobucket.com/albums/v4...ps04f71fa5.jpg


Alan Nyhus 05-03-2014 09:48 PM

Re: Nova stocker project.
 
Made 5 runs today. Had a few glitches. The Line Loc solenoid developed an internal short and blew a fuse each time...so much for anything resembling a decent burnout. On the last run, the starter acted wonky in the lanes. I went to the scales after the run and the starter drive hung up in the flex plate and wouldn't retract. But all in all, nothing too drastic.

The car drives smooth, goes straight, stops well and no parts fell off. It wasn't real fast, though...barely two tenths under the NHRA G/SA index. The car feels really 'tight' when it leaves...like maybe the convertor is 'way to tight? I checked the 'flash' on the return road a couple of times (in high gear about 20 mph) and it flashed between 4400-4500. Not where a combo like this should be...

All in all, not a horrible start. :) -Al

http://img.photobucket.com/albums/v4...psaa05f174.jpg

Glenn Hayes 05-03-2014 10:05 PM

Re: Nova stocker project.
 
What did it E.T. before you bought it?

HandOverFist 05-03-2014 11:10 PM

Re: Nova stocker project.
 
Sounds like not near the problems we are having Alan. :p Car looks great and I'm sure you will get it sorted quickly.

Alan Nyhus 05-04-2014 10:23 PM

Re: Nova stocker project.
 
Quote:

Originally Posted by Glenn Hayes (Post 430119)
What did it E.T. before you bought it?

Virtually identical times, Glen. The convertor is the big unknown. Heck, I'm not even sure whose convertor it is,though I do have all the code numbers that are stamped on it. -Al

HandOverFist 05-04-2014 10:43 PM

Re: Nova stocker project.
 
I'm learning all the stars must be aligned with these Stocker's...one piece out of whack and it all goes to hell it seems. :(

brent flynn 05-05-2014 06:13 AM

Re: Nova stocker project.
 
Quote:

Originally Posted by HandOverFist (Post 430253)
I'm learning all the stars must be aligned with these Stocker's...one piece out of whack and it all goes to hell it seems. :(

Ditto! :D


All times are GMT -4. The time now is 05:37 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.