CLASS RACER FORUM
Page 8 of 20 « First 67 8 91018 Last »
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Class Racer Builds (https://classracer.com/classforum/forumdisplay.php?f=58)
-   -   79 Mustang project U/SA (https://classracer.com/classforum/showthread.php?t=59346)

RobbieRacer 02-11-2016 06:47 PM
Re: 79 Mustang project U/SA
 
Score! Picked up a 78 302 out of a T-bird. All the right parts and std bore. Almost done hunting down parts.

George W 02-12-2016 02:41 PM
Re: 79 Mustang project U/SA
 
Great RobbieRacer, now you need to get this all together for testing.Great thing with the Fox Bodies you can find parts used with a little hunting

RobbieRacer 02-21-2016 06:44 PM
Re: 79 Mustang project U/SA
 
1 Attachment(s)
Got some more work done. Got the K member stripped and repainted. There must have been 10 pounds of grease on it.
Also got the motor pulled apart. This motor turned over with no problem, Not tight at all. I have never seen a crank with this much damage that didn't have a broken rod. 1/4 inch groove worn in it. WOW.

Rick Unterseh 02-21-2016 10:49 PM
Re: 79 Mustang project U/SA
 
Wellllllllll, get it together and come race at the Vegas National !!

RobbieRacer 02-22-2016 01:39 PM
Re: 79 Mustang project U/SA
 
This year will be getting it together and testing. But I plan on hitting it hard next season.

Dave Muller 02-22-2016 02:36 PM
Re: 79 Mustang project U/SA
 
Quote:
Originally Posted by RobbieRacer (Post 496510)
This year will be getting it together and testing. But I plan on hitting it hard next season.
Looks like you and I are pretty close to the same schedule.

Charlie A 02-22-2016 08:26 PM
Re: 79 Mustang project U/SA
 
Quote:
Originally Posted by RobbieRacer (Post 496421)
Got some more work done. Got the K member stripped and repainted. There must have been 10 pounds of grease on it.
Also got the motor pulled apart. This motor turned over with no problem, Not tight at all. I have never seen a crank with this much damage that didn't have a broken rod. 1/4 inch groove worn in it. WOW.
http://classracer.com/classforum/att...7&d=1456094618

Dave Noll 02-23-2016 02:16 AM
Re: 79 Mustang project U/SA
 
Just use it for a core on a crank kit. :rolleyes:

goinbroke2 02-23-2016 05:53 AM
Re: 79 Mustang project U/SA
 
Quote:
Originally Posted by RobbieRacer (Post 496421)
Got some more work done. Got the K member stripped and repainted. There must have been 10 pounds of grease on it.
Also got the motor pulled apart. This motor turned over with no problem, Not tight at all. I have never seen a crank with this much damage that didn't have a broken rod. 1/4 inch groove worn in it. WOW.
Bah, it's a ford, string and scouring pad dipped in 30wt and it'll go another 150,000 minimum!

Now if it was a chev....it would of been in pieces when you found it! LOL!

RobbieRacer 02-24-2016 01:49 PM
Re: 79 Mustang project U/SA
 
1 Attachment(s)
Rear end is done. Thanks AZ Differential.


All times are GMT -4. The time now is 01:40 AM.
Page 8 of 20 « First 67 8 91018 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.