CLASS RACER FORUM
Page 8 of 22 « First 67 8 91018 Last »
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Class Racer Builds (https://classracer.com/classforum/forumdisplay.php?f=58)
-   -   69 Camaro B/S (https://classracer.com/classforum/showthread.php?t=64779)

Nmbr1GMfan 04-07-2018 10:48 AM
Re: 69 Camaro B/S
 
Quote:
Originally Posted by J&S Racing (Post 560053)
I saw the adapters but figured it was just another place to leak or have a problem. For the extra 100 I felt it was well worth it.. think I have 6 change into the rad, fans, shroud and fittings.....I set out to way over build the car in case I wanna go a different route some day but most importantly I want to lessen any chance of problems so I can drive it like I stole it...
And that's a great plan.

Hacksaw 04-12-2018 04:17 PM
Re: 69 Camaro B/S
 
After I saw the pics of the cage in your car. I thought the fab guy did a nice job, ( post # 40 ) and in # 67 your bashing his work. ????

J&S Racing 04-12-2018 05:10 PM
Re: 69 Camaro B/S
 
The more time I spend with it the more disappointed I get... don't get me wrong, it had the potential to be a super nice piece but some of the fit is horrible and they tried to cover it with questionable welding along with other issues.. the recent realization that the bars are a $700 paperweight prompted a Google Search of his name where I found ALL Horror stories. Out of 3 or 4 guys I was the only one to get my car back in one piece.

Nmbr1GMfan 04-12-2018 06:07 PM
Re: 69 Camaro B/S
 
Whoa!

J&S Racing 05-19-2018 05:21 PM
Re: 69 Camaro B/S
 
I would like to thank site sponsor Gregg Kelly from MotorSports Innovations.
Picked up a IQ3 logger dash, MSD 7AL3 and HVC coil.

I was able to make a deal on a soft lok. Its on its way to Mcleod now for rebuild. Hopefully have everything wired by the time its back so I can fire this thing off!!!!:D

https://i.imgur.com/MvvedyB.jpg
Got everything mounted today. start running wires tomorrow.


https://i.imgur.com/YtR4U5z.jpg
Boy it took a lot of work getting everything fit with the dash bar. The fuel gauge needed some trimming but I made it all work..

https://i.imgur.com/teV32qy.jpg
Sure had more important things to do but after a few Cape coddaaas I used a extra piece from the roll bar cover and made mirror block offs.

David Lee 05-19-2018 06:07 PM
Re: 69 Camaro B/S
 
who's relay panel are you using?

J&S Racing 05-19-2018 07:11 PM
Re: 69 Camaro B/S
 
Quote:
Originally Posted by David Lee (Post 563452)
who's relay panel are you using?
That's K&R's setup.. way overkill for what I'm doing but again I wanted options in the future..

Super nice deal!! The switch panel attaches with 1 plug. The kit comes with enough wire, ends and shrink tubing to wire a few cars. All the wires are labeled and it comes with a nice laminated schematic.

James Perrone 05-19-2018 07:57 PM
Re: 69 Camaro B/S
 
Shane why is the steering wheel so so square at the bottom?
Is it. 1 too many double cheeseburgers sandwiched between grilled cheeses?
Oh and a frosty shake. Lol

Nmbr1GMfan 05-19-2018 08:44 PM
Re: 69 Camaro B/S
 
Nice! That ignition is pimp! How long till the clutch comes back?

David Lee 05-19-2018 09:01 PM
Re: 69 Camaro B/S
 
Quote:
Originally Posted by J&S Racing (Post 563453)
That's K&R's setup.. way overkill for what I'm doing but again I wanted options in the future..

Super nice deal!! The switch panel attaches with 1 plug. The kit comes with enough wire, ends and shrink tubing to wire a few cars. All the wires are labeled and it comes with a nice laminated schematic.
Thanks, i think i will sell of that old painless panel I have


All times are GMT -4. The time now is 08:53 AM.
Page 8 of 22 « First 67 8 91018 Last »
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.