CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Class Racer Builds (https://classracer.com/classforum/forumdisplay.php?f=58)
-   -   Ford C4 Transmission Build (https://classracer.com/classforum/showthread.php?t=79167)

west coast 04-30-2021 03:13 PM

Ford C4 Transmission Build
 
I am building a back up transmission for my car 1988 Mustang stock eliminator K/SA. I am a newby to youtube but giving it a try. First off I am no expert at anything, I have thick skin so dont be afriad of affending me. Comments welcome, I have learned everything by doing. I have build my stocker from the ground up everything, except when i dont have the tooling to do it like engine machine work like block and cylinder head work. I do everthing cause I enjoy it. Knew nothing about fuel injection when I started on this car. I have learned a lot and still learning. I tune my own car.

So I am documenting this tranny build because all this knowledge is in my head and after a couple of years of not doing it, you forget the small things. I will go over the modification I do, part# and machining parts for rollerising the trust washer.

Maybe I convert some stick guys to the dark side LOL

<iframe width="560" height="315" src="https://www.youtube.com/embed/D4rkiT10mxc" title="YouTube video player" frameborder="0" allow="accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture" allowfullscreen></iframe>

west coast 04-30-2021 03:17 PM

Re: Ford C4 Transmission Build
 
Ok need help on posting a my Youtube video for tranny build. It just post a long text of the embed link thats not a link?

Dave Noll 04-30-2021 06:41 PM

Re: Ford C4 Transmission Build
 
https://www.youtube.com/embed/D4rkiT10mxc" title

Is this what you needed to know?

west coast 04-30-2021 09:30 PM

Re: Ford C4 Transmission Build
 
Yes that is what I was trying to do, had to step away from the computer for a couple of hours to gain my sanity after a couple of hours trying to do it. Thank you Dave. I will send you a PM need to know what I am doing wrong. I have part 2 ready to go.

Dave Noll 05-01-2021 04:53 PM

Re: Ford C4 Transmission Build
 
https://youtu.be/a1kValvIrs8

This is James 2nd video of a series that he's doing.

Mark Yacavone 05-01-2021 11:17 PM

Re: Ford C4 Transmission Build
 
Good job, James

Is it fair to say this young guy is a real Old School racer?

BTW, you just paste the Y/T URL on this forum..This one's easy.

west coast 05-02-2021 01:26 PM

Re: Ford C4 Transmission Build
 
Mark thanks for the compliment. You came by at a race (I think it was Woodburn) a couple years ago and ask about who does my motor. We had a talk about my car for awhile.

Have 2 more video’s just need to do some more editing. Low gear set and a governor modification.

Thanks to Dave Noll for posting my YouTube video’s. Still trying to do it myself, getting closer. For some reason still just post the text. Will be trying later today.

Dave Noll 05-02-2021 09:48 PM

Re: Ford C4 Transmission Build
 
https://youtu.be/yTjUC9cTOBY

Carguy49 05-03-2021 04:14 PM

Re: Ford C4 Transmission Build
 
James, nice job on the videos. I have watched them all. Kudos to Dave Noll in helping you getting them posted

Dragsinger 05-04-2021 02:07 PM

Re: Ford C4 Transmission Build
 
James, to me, this embodies the true spirit of hot rodding. I enjoyed the post, good job.

"I am building a backup transmission for my car 1988 Mustang stock eliminator K/SA. I am a newbie to youtube but giving it a try. First off, I am no expert at anything. I have thick skin, so don't be afraid of offending me. Comments welcome. I have learned everything by doing. I have to build my stocker from the ground up everything, except when I don't have the tooling to do it like engine machine work like block and cylinder head work. I do everything cause I enjoy it. I knew nothing about fuel injection when I started on this car. I have learned a lot and still learning. I tune my own car.

Dave Noll 05-04-2021 11:28 PM

Re: Ford C4 Transmission Build
 
...

west coast 05-06-2021 04:08 PM

Re: Ford C4 Transmission Build
 
[QUOTE=Dragsinger;639815]James, to me, this embodies the true spirit of hot rodding. I enjoyed the post, good job.

Thanks Larry
The class racer build I think is the best section. Loved your Super 10 build. Lots of great stuff you posted by doing everthing.

SSDiv6 05-07-2021 01:51 PM

Re: Ford C4 Transmission Build
 
Quote:

Originally Posted by Dragsinger (Post 639815)
James, to me, this embodies the true spirit of hot rodding. I enjoyed the post, good job.

"I am building a backup transmission for my car 1988 Mustang stock eliminator K/SA. I am a newbie to youtube but giving it a try. First off, I am no expert at anything. I have thick skin, so don't be afraid of offending me. Comments welcome. I have learned everything by doing. I have to build my stocker from the ground up everything, except when I don't have the tooling to do it like engine machine work like block and cylinder head work. I do everything cause I enjoy it. I knew nothing about fuel injection when I started on this car. I have learned a lot and still learning. I tune my own car.

I have known James for some time and he enjoys learning and trying things on his own to learn. He also does research and not afraid to ask questions.

west coast 05-10-2021 05:15 PM

Re: Ford C4 Transmission Build
 
https://www.youtube.com/watch?v=K_bH4dGIaOY

WOW for some reason I can post my youtube video Yea. So this one is about the govenor, putting a bearing in it for support. One way clutch tip and some assembling. Thanks for the kind words Joe, you have always been helpful when I have questions.

west coast 05-10-2021 07:14 PM

Re: Ford C4 Transmission Build
 
This video is some thing I have not done before which is lightening the sun shell. Usually I buy this part but they were out of stock of them so off to the mill to do it myself. This took me a little time to figure out. I did one sun shell just to see if I could do it, was surpise that it came out very well. So I did a second one for the video. The second one took a lot less time.

https://www.youtube.com/watch?v=sQEO_yyjC8g

FireSale 05-12-2021 10:45 AM

Re: Ford C4 Transmission Build
 
Deleted. My humor is misunderstood.

Carguy49 05-14-2021 10:42 AM

Re: Ford C4 Transmission Build
 
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

west coast 05-21-2021 03:29 PM

Re: Ford C4 Transmission Build
 
Dale I understood your humor, I can see why other people my not because they dont know me or the stories behind the humor. Its all good with with me.

Here is the next video which is on a manual reverse valve body kit and my rambilings on pan, filter, dipstick and fluid level. Working on the next video but mostly waiting on parts.

https://www.youtube.com/watch?v=2zskw_8Afac

west coast 06-07-2021 06:21 PM

Re: Ford C4 Transmission Build
 
Here is my next video in the series. After this one was done I finished the final assembly, put it in the car did a quick operation check up and down the road real quick. Had all the gears and shifted good. So i will give an updated probably this next weekend or early next week. D6 has our first race this weekend, will be testing on thursday before the race.

https://www.youtube.com/watch?v=YrdCrvq9oCw&t=3s

west coast 06-15-2021 12:03 AM

Re: Ford C4 Transmission Build
 
Raced for the first time this year at Pacific Raceway Division 6. There was more rain then there was racing, so this turned out to be a one day race on saturday. One qualifing hit and off to 1st round. I lost in the second round. My fastest pass of the day was qualifing in the video I show my time slip, my # is 6052 in the right lane. Saturday was very hectick to say the least had some issues with the battery almost missed the qualifing run. I should of had a video of the run, dont know what I was thinking.

https://www.youtube.com/watch?v=uO7CBcxFcv4

Mark Yacavone 12-13-2023 11:49 PM

Re: Ford C4 Transmission Build
 
Hey James,
I've got a couple of question for you.
Can you text me your number?
Thanks

6027690346
myac455@gmail.com

goinbroke2 12-14-2023 02:42 AM

Re: Ford C4 Transmission Build
 
I’m spending way too much time on YouTube lately because of videos like these!!
Great job, I’ll be rewatching them when I pull mine out for freshening.

I’m seeing that I’ve forgot more than I thought in the last 30 years…🫣🫣


All times are GMT -4. The time now is 05:21 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.