CLASS RACER FORUM
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   cc'ing cylinder heads (https://classracer.com/classforum/showthread.php?t=76242)

jmantle 05-13-2020 08:07 PM
cc'ing cylinder heads
 
I normally use isopropyl alcohol for checking chamber and port volumes, can't seem to buy any right now, what else works?

Jim Mantle V/SA 6632

John Dinkel 05-13-2020 08:28 PM
Re: cc'ing cylinder heads
 
Mineral spirits

silversedan 05-13-2020 11:03 PM
Re: cc'ing cylinder heads
 
I use marvel mistery oil , cause it's red an easy to see.

MAURICE BLENDHEIM 05-13-2020 11:23 PM
Re: cc'ing cylinder heads
 
Jim... COORS LIGHT or I've used the blue windshield washer fluid, it cleans up easier. MB

Mike Taylor 3601 05-14-2020 09:33 AM
Re: cc'ing cylinder heads
 
methanol would be another

Rich Biebel 05-14-2020 12:07 PM
Re: cc'ing cylinder heads
 
Mineral spirits...…fresh and clean so it doesn't clog the burette...

Never used anything else....

Chipper Chapman 05-14-2020 03:08 PM
Re: cc'ing cylinder heads
 
x2 windsheild wash

Tim Barrett 05-14-2020 06:02 PM
Re: cc'ing cylinder heads
 
Mineral spirits,,I use isopropyl alcohol and I add a little food color so it's easier to see in the burret.

gmonde 05-14-2020 07:22 PM
Re: cc'ing cylinder heads
 
Quote:
Originally Posted by Chipper Chapman (Post 614660)
x2 windsheild wash
same here!

SGSST109E 05-15-2020 07:44 AM
Re: cc'ing cylinder heads
 
Mineral spirts, isopropyl alcohol. Have used both.


All times are GMT -4. The time now is 04:41 AM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.