CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   7.5 to 8.8 mustang swop? (https://classracer.com/classforum/showthread.php?t=1132)

greg fulk 04-02-2007 04:03 PM

7.5 to 8.8 mustang swop?
 
Hey Guys I picked up an 8.8 with a posi & 3.73 gear in it @ the swop meat saturday..... so how big a deal is it to change ? the car is a 92 LX. the rearend i got is complete ... looks like they just took a torch and cut all the control arms off along with the E-brake. also can i just unbolt the brakes off the 7.5 & bolt them to the 8.8? i would like to keep the E-brake Marissa is going to drive this on the street . & will the control arms off the 7.5 work?

novamoation

partsbob67 04-02-2007 06:46 PM

just bolt it in. arms are the same. i would go ahead and replace all the bushings since you have it out.


SSDiv6 04-02-2007 07:42 PM

1987 to 1993 will bolt in; 1994 or newer will not bolt in.


FE Rory 04-02-2007 08:12 PM

The only thing that may be a concern is the rear brake hose and rubber hose. The 8.8 will have the brake hose mounted to a diff cover bolt, near the center of the housing. All the 7.5"`s that I have seen have the rubber brake hose attatched to the right axle tube, mounted by the diff vent fitting. On a car with a dual exaust system, the rubber hose gets very close to the tailpipe. Also, depending on the years involvd, the park brake cables may be different. I think the 79-86 cables are all the same, but they changed in 1987, where the cable attatches to the hand brake lever.


greg fulk 04-02-2007 11:26 PM

Marissa says thanks guys! will be trying to bolt in ..in a few weeks . keep you guy posted!

novamoation


All times are GMT -4. The time now is 04:46 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.