CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Mclay 200 tail shaft seal question (https://classracer.com/classforum/showthread.php?t=52609)

Chuck Garey 04-14-2014 12:35 PM

Mclay 200 tail shaft seal question
 
I was doing a little bracket racing over the weekend when one of the track guys came to me and said I was "spraying " fluid on the track @ launch for about 60' the only thing I can find is what apppears to be tranny fluid around the area of tail shaft. My question is does Mclay take a special seal and what should I be looking for? I doubt I can walk in the nearest AutoZone and get it.

Chad Rhodes 04-14-2014 12:50 PM

Re: Mclay 200 tail shaft seal question
 
check the vent. on the 200's the vent is toward the rear and is more susceptible to leaking fluid. I put a catch can on mine

Chuck Garey 04-14-2014 12:54 PM

Re: Mclay 200 tail shaft seal question
 
Thanks I'll check it out.

HandOverFist 04-14-2014 01:58 PM

Re: Mclay 200 tail shaft seal question
 
Vented...

http://i434.photobucket.com/albums/q...psf21da41e.jpg

http://i434.photobucket.com/albums/q...pse33924d1.jpg

Ed Wright 04-14-2014 02:29 PM

Re: Mclay 200 tail shaft seal question
 
Isn't that vent tube supposed to go to a catch can?

HandOverFist 04-14-2014 03:14 PM

Re: Mclay 200 tail shaft seal question
 
Quote:

Originally Posted by Ed Wright (Post 427832)
Isn't that vent tube supposed to go to a catch can?

I've never seen a catch can on a trans Ed. Had it explained to me there is another method to dump it right back into the transmission...at any rate this has never leaked a drop.


All times are GMT -4. The time now is 06:52 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.