CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Coating pistons (https://classracer.com/classforum/showthread.php?t=63018)

jamie2370 07-25-2016 06:03 PM
Coating pistons
 
Anybody have any experience coating pistons to take up cyl wall clearance. I'm at about .014 skirt clearance. Trying to get this one back together and then build a new better bullet. .005 would put me around .008-.009 and I can work with that.

Terry Cain 07-25-2016 08:20 PM
Re: Coating pistons
 
No experience with coating but I have knueled shirts before and they got me by for a while.

pmrphil 07-25-2016 09:00 PM
Re: Coating pistons
 
I've used Swain Coatings in upstate NY and had excellent results.
Did exactly what you want to do.

Dwight Southerland 07-25-2016 11:04 PM
Re: Coating pistons
 
https://www.line2linecoatings.com/

jamie2370 07-26-2016 09:29 PM
Re: Coating pistons
 
Thanks guys. Line 2 Line is able to handle exactly what I need.


All times are GMT -4. The time now is 08:43 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.