LT-1 Heads
 

How do you install LT-1 heads on a bow tie block in SS Is welding required or is there a way to do it with a bypass hose? Thanks.

Re: LT-1 Heads
 

Lee, there are two plugs welded on the deck, oblong shaped. Then the pipe plugs on the front end of each head are drilled and tapped larger for water hoses. I can try to get you pictures of mine if you like.

Re: LT-1 Heads
 

Ed, would like pictures if possible. My e mail 1661stock@gmail .com Thanks.

Re: LT-1 Heads
 

Sent.

Re: LT-1 Heads
 

Hi Ed......Could you send me pics of this also? Thankyou much!

Re: LT-1 Heads
 

Give me your email. Or I can text it if I had your ph #. Send me a pm.

Re: LT-1 Heads
 

Get the second picture too?

Re: LT-1 Heads
 

yes....those attach to the lower radiator hose? where do i get such a fitting?

Re: LT-1 Heads
 

Upper hose, which is on the driver's side. Lower hose, from the water pump, goes to the bottom of the passenger side of the radiator. I Tig welded mine together from a piece of 1 1/2" exhaust tubing, a piece of steel plate to cap off one end, and steel -10 AN fittings Tig welded to it. Those two -6 fittings on top, that are capped, are not needed.

Re: LT-1 Heads
 

Did mine like Ed did his,works fine.