CLASS RACER FORUM
Page 1 of 3 1 23
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   1969 Chevelle 325HP (https://classracer.com/classforum/showthread.php?t=78234)

boxmotorsports 01-05-2021 09:10 AM
1969 Chevelle 325HP
 
Happy New Year everyone, I hope everyone is staying safe. I am looking for some advise. Refreshing my 396 325HP engine in my 1969 Chevelle. Looking for advise on an oil pan and valve springs. Thanks

Larry Hill 01-05-2021 01:43 PM
Re: 1969 Chevelle 325HP
 
The oil pan will be on the NHRA approved list if there is one. Valve Springs PAC

Barry Polley 01-05-2021 02:23 PM
Re: 1969 Chevelle 325HP
 
PMsent

Barry Polley 01-05-2021 02:31 PM
Re: 1969 Chevelle 325HP
 
pm sent

Chevy55 01-05-2021 07:38 PM
Re: 1969 Chevelle 325HP
 
If this is legal................
https://rehermorrison.com/product/wet-sump-system/

Jim Kaekel 01-07-2021 11:40 AM
Re: 1969 Chevelle 325HP
 
Quote:
Originally Posted by Chevy55 (Post 631185)
Not legal in Stock Eliminator.

Doug: That's a good combo, and the '69 Chevelle is factored to 325/316. My son's running the same combo in a '68 Camaro. Look over the NHRA-approved products closely.

Chipper Chapman 01-13-2021 07:35 PM
Re: 1969 Chevelle 325HP
 
I use the Moroso 20451 pan on mine. Fits well, but no room to spare on crossmember. Hangs a tick below crossmember as well. You will want the PAC conical springs #1427

SSGN 01-14-2021 07:30 AM
Re: 1969 Chevelle 325HP
 
Quote:
Originally Posted by Chipper Chapman (Post 631944)
I use the Moroso 20451 pan on mine. Fits well, but no room to spare on crossmember. Hangs a tick below crossmember as well. You will want the PAC conical springs #1427

I didn't think you could run that pan in stock? The sump is lowered. This is the pan I found however it won't fit on my Gen 6.

https://www.summitracing.com/parts/chp-cp207

SSDiv6 01-14-2021 07:47 PM
Re: 1969 Chevelle 325HP
 
Get the Milodon 30710 NHRA accepted oil pan and send it to Stef's to have their trap door and scraper installed.

MAURICE BLENDHEIM 01-14-2021 10:41 PM
Re: 1969 Chevelle 325HP
 
Box... MOROSO 20451 is a nice pan...MB.


All times are GMT -4. The time now is 10:51 PM.
Page 1 of 3 1 23
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.