Transmission Shield 727
Will a CSR transmission shield for a 727 fit in a stock '64 Dodge 330 trans tunnel? What is everyone using? Tom Nolan
|
Re: Transmission Shield 727
It should. I had one in my '64 Belvedere.
You may have to roll the lip on the pinch weld in the floor but otherwise it should be fine |
Re: Transmission Shield 727
Tom, it's tight but it'll work. That's what I run. The strap buckle needs to be on the linkage side. Mine jams against the tunnel if installed on the passenger side, and doesn't allow proper bolt alignment. -JB-
|
Re: Transmission Shield 727
I wished CSR would provide an access hole for the band adjustment on a Pro Trans !
|
Re: Transmission Shield 727
Thanks for the advice! I ordered a shield.
|
Re: Transmission Shield 727
Do they have them in stock again I've been waiting to get one.
|
Re: Transmission Shield 727
Delivery in mid October
|
Re: Transmission Shield 727
//
|
All times are GMT -4. The time now is 07:39 PM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.