Chevy II bump steer
 

Has anybody used a bump steer kit for a 66-67 Chevy II with stock suspension?

Re: Chevy II bump steer
 

Try Eddie Rezac.He has been doing them for years and they work. Search on here for info. Tom

Re: Chevy II bump steer
 

Call Eddie. He’s the best. He fixed up my 66 Chevy II.

Re: Chevy II bump steer
 

Ditto Ed and Tom's comments. Have one of Eddie's kits on my 66 2-dr sedan.

Re: Chevy II bump steer
 

Yup,
I am still doing them! Call me, at; 402 443 8424
Eddie Rezac

Re: Chevy II bump steer
 

Good morning,
I've been looking at my 1969 Chevy Nova and wanting to check "Bump Steer". I know my front suspension is like 1967 thru 1969 Camaro. Do you have anything for my application? My Front End Guy is no longer with us and I will be doing more of this in the future. Any help or guidance would be Greatly Apricated. Thank you in advance.

Re: Chevy II bump steer
 

I spent a bit of time with one of these. My advice is to limit the travel on the upper control arm from dropping too far. The bump steer gets crazy just that last inch or so.

Re: Chevy II bump steer
 

I only do these for the 1962-1967, early Chevy 11, and only for drag racing, no street cars at all, what so ever.
Eddie

Re: Chevy II bump steer
 

Good morning, and Thank you for your reply. I'll be looking into this as soon as the snow melts in front of the garage. This is for a Stocker, not a street car, I'm not sure I have a problem but I think its something else to check on.
Have a Good Day!

Re: Chevy II bump steer
 

Jim's advice on limiting the last inch or so is what I have found too, I also heat and bend the steering knuckles down 1/2" or so and that also helps.