CLASS RACER FORUM
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Mounting Turbo Action Shifter (https://classracer.com/classforum/showthread.php?t=69637)

David Lee 04-20-2018 06:23 PM
Mounting Turbo Action Shifter
 
I just purchased on of these to go into my cuda and am looking for some mounting options. There is no center console in the car and would like to see what other people have done

Thanks

Dave

Demon340 04-20-2018 11:55 PM
Re: Mounting Turbo Action Shifter
 
I bolted it directly to the tunnel with 1/4 inch bolts on our A body cars. My sons was little better fitting because of old floor shifter and the tunnel was flatter.
Larry

theman440 04-21-2018 12:17 AM
Re: Mounting Turbo Action Shifter
 
^^^^^^^ Ditto ^^^^^^^^

David Lee 04-21-2018 01:03 AM
Re: Mounting Turbo Action Shifter
 
Quote:
Originally Posted by Demon340 (Post 561237)
I bolted it directly to the tunnel with 1/4 inch bolts on our A body cars. My sons was little better fitting because of old floor shifter and the tunnel was flatter.
Larry
Thanks. do you directly bolt it the floor boards and mount a little higher higher?This is for a 67 notch

Larry Hill 04-21-2018 08:03 AM
Re: Mounting Turbo Action Shifter
 
Bolt it to the floor after you find out what is a comfortable location for you.

jimmyparker 04-21-2018 10:14 AM
Re: Mounting Turbo Action Shifter
 
I usually space the front of the shifter up some as the neutral safety switch is tight against the floor in some applications.

Demon340 04-21-2018 01:45 PM
Re: Mounting Turbo Action Shifter
 
On my son's 73 Dart we used washers under the back because of the angle of the cable going through the floor. Like others have said, what fits best for your comfort.

Rick Kolber 04-23-2018 06:13 PM
Re: Mounting Turbo Action Shifter
 
Mine is mounted on a pedestal on the tunnel bringing the shifter up an closer to me.

David Lee 04-23-2018 06:29 PM
Re: Mounting Turbo Action Shifter
 
Quote:
Originally Posted by Rick Kolber (Post 561517)
Mine is mounted on a pedestal on the tunnel bringing the shifter up an closer to me.
I made my own mount, using the 3/16 aluminum plate with specers to make it higher.

Thanks to all for the help

65signet 04-24-2018 03:52 PM
Re: Mounting Turbo Action Shifter
 
I use a piece of angle iron, so its sits up higher, and i weld the angle to the floor, with some flat bar on the other side for support, then bolt the shifter to angle.


All times are GMT -4. The time now is 08:42 PM.
Page 1 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.