CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Support Tech (https://classracer.com/classforum/forumdisplay.php?f=52)
-   -   powdercoat flexplate (https://classracer.com/classforum/showthread.php?t=84275)

drgrcr1156 02-24-2023 07:33 PM
powdercoat flexplate
 
Let me ask the question here since NHRA has not responded. I purchased a new SFI 29.1 flexplate and it came in powdercoated. I was checking the spec for another reason, and I see that it specifies "No Powdercoat finish". Granted, there is no real tech inspection, but I don't need the hassle should it ever happen. Did the spec change?

Keith 944 02-24-2023 07:59 PM
Re: powdercoat flexplate
 
Quote:
Originally Posted by drgrcr1156 (Post 676422)
Let me ask the question here since NHRA has not responded. I purchased a new SFI 29.1 flexplate and it came in powdercoated. I was checking the spec for another reason, and I see that it specifies "No Powdercoat finish". Granted, there is no real tech inspection, but I don't need the hassle should it ever happen. Did the spec change?
Doubtful that would be an issue. It already has the decal. It was done by the manufacturer. however, I strongly advise sanding off any paint or powder coating at the crank bolts location: I have seen 2 chip off and then the bolts loosen up.


All times are GMT -4. The time now is 09:51 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.