Stock Eliminator Rods
How many runs do you normally put on a set of H beam rods before changing them out?
|
Re: Stock Eliminator Rods
A bunch.....I run aftermarket rods and
have some shortblocks in my bracket car that the rods have 10 Seasons and 1000 passes. I check bearings and do a valve job around 250 to 300 runs I run Race Rings in a lot of my cars (Gregg Luneauk) from TriCity Performance = I ran 1000+ passes on them and they still leaked down pretty decent! Currently 400 plus in my O/SA Aspen Wagon on Rings and probably 800 on the Rods or more! Your Mileage may vary!! |
Re: Stock Eliminator Rods
During a refresh, check the big end and small end dimensions and if replace the bolts every 4 engine refresh.
|
Re: Stock Eliminator Rods
Quote:
|
All times are GMT -4. The time now is 07:06 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.