Rochester 2GC info
Just doing a little bench racing and looking at the 350 Chevy 250/230 with the Rochester 2GC 1686/1375. I was checking to see if any other of the GM (Buick,Pontiac or Olds) cars ran the big 2 bbl. I didn't look at them all but it appeared only Chevy listed carb. measurements on the NHRA blueprint guide. Was the big 2bbl only used on the 350 Chevy? I would expect Billy Nees or Mark Yacavone, the gurus of the odd and obscure combos to chime in on this one. I have the highest respect for these guys because I love odd and obscure combos too.
|
Re: Rochester 2GC info
Quote:
I agree, Billy and Mark would know. Alan Peters too. Mike A114 P/SA |
Re: Rochester 2GC info
I believe that the 1969 and 1970 Chev 350 250 were the only engines to use this size carb. I queried the database for the ClassRacerInfo website and they were the only two engines that used a Rochester carb with 1.375" venturi.
There were some Oldsmobile engines from 1969 thru 1972 that used 2-Bbl carbs with 1.313" venturi. There are no listed carb sizes for the Pontiac 2-Bbl carbs in the Tech Bulletins until 1974. |
Re: Rochester 2GC info
Quote:
Learn something everyday. Thought the 400 used the large 2GC. Thanks Dwight. Mike A114 P/SA |
Re: Rochester 2GC info
Quote:
|
Re: Rochester 2GC info
Quote:
|
Re: Rochester 2GC info
How many of the 1.375 venturi's do you need? I think i have a couple
in the shed. Also venturi clusters and baseplates left over from the local circle track racers who now are allowed to run holley 4412's. Now is it true or false, nhra no longer is enforcing the carb. P/number but as long as it meet's dimensional configuration and " original visual design" it's good...... (notice i said original design ). So with that being said and "untouched rochesters" being harder to find. Why can't the marine carb. (that meets the above specification) be used??? Easier to find (yes, even in the darn) desert and has all the good parts already installed (ok, maybe not all, but it has the "good booster cluster" and comes very darn close on the "fuel curve" needed. Norm |
Re: Rochester 2GC info
Quote:
I was told the difference between the big and small carb is about .5 Mike A114 P/SA |
Re: Rochester 2GC info
Quote:
You have a PM Mike A114 P/SA |
Re: Rochester 2GC info
I may be interested in 2 of these carbs. New dirt track rules from imca and they are quoting the 1.375 carb as being the 1 to use. Price for 2 complete shipped to 85013 if interested in selling.
QUOTE=NORMAN BARNARD;482788]How many of the 1.375 venturi's do you need? I think i have a couple in the shed. Also venturi clusters and baseplates left over from the local circle track racers who now are allowed to run holley 4412's. Now is it true or false, nhra no longer is enforcing the carb. P/number but as long as it meet's dimensional configuration and " original visual design" it's good...... (notice i said original design ). So with that being said and "untouched rochesters" being harder to find. Why can't the marine carb. (that meets the above specification) be used??? Easier to find (yes, even in the darn) desert and has all the good parts already installed (ok, maybe not all, but it has the "good booster cluster" and comes very darn close on the "fuel curve" needed. Norm[/QUOTE] |
All times are GMT -4. The time now is 12:50 AM. |
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.