Comp Cams DLC Hydraulic Flat Tappet Lifter
 

Has anyone seen or used these? If so any feedback?


https://www.edelbrockgroup.com/wp-co...ters-FINAL.pdf


Stan

Re: Comp Cams DLC Hydraulic Flat Tappet Lifter
 

Are these available?

Re: Comp Cams DLC Hydraulic Flat Tappet Lifter
 

Two key factors ,at what valve seat pressure ,and the open pressure seem to be missing in their statement , were lifters tested at around 200 lbs. on the seat ,and for how long were they tested ,was the cam used a stock eliminator cam ,for me I would ask a lot more questions before I put them in my engine

Re: Comp Cams DLC Hydraulic Flat Tappet Lifter
 

Hey guys, a $120.00 set of SBC lifters will not solve any of my problems ….:):)

Re: Comp Cams DLC Hydraulic Flat Tappet Lifter
 

And from the same company that tells you "not to run a coated lifter on a cast cam"!!

Re: Comp Cams DLC Hydraulic Flat Tappet Lifter
 

That's each. $1920 for a set of 16. :)

Re: Comp Cams DLC Hydraulic Flat Tappet Lifter
 

Jegs shows they would ship from the manufacture 1/24 "pending manufacturing availability, but as we all know that does not always happen, $119.95 for 16.

With "pro shop" discount $112.75.

Re: Comp Cams DLC Hydraulic Flat Tappet Lifter
 

damn

Re: Comp Cams DLC Hydraulic Flat Tappet Lifter
 

Time to rethink this lifter rule.

Re: Comp Cams DLC Hydraulic Flat Tappet Lifter
 

I guess I’m lucky in this case. I’ve got a factory roller cam car. But look at what it costs to do this. If your already in it. What’s $2000 more to keep going. Everyone just has to decide for themselves where that line of spending vs worth it is. Financially it’s dumb to just be involved for 99% of us.