CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   Master cylinder (https://classracer.com/classforum/showthread.php?t=85237)

tolaas 07-11-2023 05:33 PM

Master cylinder
 
I have Strange duel calipers at the rear and Mark Wiliams single calipers at front, have strange mastercylinder 1,125, is it to small master cylinder? I think i have long way for the pedal.
Thanks, Torbjorn

340Cuda 07-12-2023 03:43 PM

Re: Master cylinder
 
My car has Strange duel calipers in back Strange singles in front. I have a Strange master cylinder but I don't remember what size. No problems but I do run 2 PSI residual valves front and rear and that helps me keep a good pedal.

All hard lines except for -3 from the frame to the wheels.

However I may be causing some brake drag with those valves, don't know.

SDT1DYI 07-12-2023 08:47 PM

Re: Master cylinder
 
Dual rear Calipers require larger volume than a single fronts. I would call both Strange and M W and confirm piston volumes. Ask Strange which port , front or back has more volume output and tube it accordingly. Based on the Piston areas , Strange should tell you if MS bore size has enough volume.

Steve Teeter Stk/SS 620

Dan Fahey 07-13-2023 08:17 AM

Re: Master cylinder
 
Quote:

Originally Posted by SDT1DYI (Post 682856)
Dual rear Calipers require larger volume than a single fronts. I would call both Strange and M W and confirm piston volumes. Ask Strange which port , front or back has more volume output and tube it accordingly. Based on the Piston areas , Strange should tell you if MS bore size has enough volume.

Steve Teeter Stk/SS 620

If interested
Have a New WIldwood Master Cylinder for sale.

Dan

CMcAllister 07-14-2023 10:39 PM

Re: Master cylinder
 
Quote:

Originally Posted by SDT1DYI (Post 682856)
Dual rear Calipers require larger volume than a single fronts. I would call both Strange and M W and confirm piston volumes. Ask Strange which port , front or back has more volume output and tube it accordingly. Based on the Piston areas , Strange should tell you if MS bore size has enough volume.

Steve Teeter Stk/SS 620

Port towards the pushrod goes to the side needing more volume. In this case, the rear.


All times are GMT -4. The time now is 04:37 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright © Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.