CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Stock and Super Stock Tech (https://classracer.com/classforum/forumdisplay.php?f=4)
-   -   edelbrock q jets?? (https://classracer.com/classforum/showthread.php?t=1102)

davyjones 04-15-2007 04:11 AM

edelbrock q jets??
 
I have looked on thier website and those that sell thier products ... doesnt seem like they are making the stock /superstock legal q jets anymore ? i belive the part # were 1902 -1904 ?? any info appreciated


MaxZRX 04-15-2007 01:12 PM

You can still find them on e-bay,or you can call Dean Oliver.


Thanks, Alan Warman L/SA 4103

larry lomascolo 04-15-2007 04:47 PM

they did stop making the s/ss carbs a couple years ago .do not no why they disscontinued them.


davyjones 04-15-2007 10:05 PM

well thats just great ... thanks


Dean Oliver 04-16-2007 09:01 AM

davy,

Alan and Larry are correct, Edelbrock discontinued the Q-jet carburetor line almost two years ago. Anything you find now is new old stock. Edelbrock does, however, still carry tuning parts (jets, rods, hangers, etc.).

Edelbrock actually used the same company (Magnetti Merelli) that
Rochester used to produce the carbs for them, so there is no advantage/disadvantage one way or the other. The 1901 and 1902 carbs were the small Q-jet (1.093" primary venturi) and the 1903, 1904, and 1910 were the large Q-jet (1.218" primary venturi). You can still find these on ebay like Alan mentioned, or I do still have a stock of new ones in inventory.

It's too bad that no one has stepped up to re-start production of these carbs. I keep my fingers crossed, but as time goes by, I believe the likelihood of that happening gets less and less.

Hope this helps.

Dean


Danny Ashley 04-16-2007 03:50 PM

You can get the remanufactured Edelbrock Q-Jets #1902 ( #9972 ) and #1903 ( #9973 ) from Jeg's and Summit with Jeg's being a little less expensive. I have blueprinted some of these and other than not having the Edelbrock tags, they look new. The ones I did didn't even appear to have been bolted on. I wouldn't be afraid to recommend them to a customer. Danny @ Q-Jet Performance.



All times are GMT -4. The time now is 11:24 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.