cam spec results
 

can anyone tell me if they have raced or dynoed a cam with these spec.s' and if so can you tell what kind of hp and torque did you get out of the engine and at what rpm,spec's or :@.050 intake 278 duration .465 lobe lift and exhaust @.050 292 duration .440 exhaust lift using a 1.7 intake rocker intake 1.65 exhaust, lobe separation 108

Re: cam spec results
 

Unfortunately for that type of question, you have to say what kind of engine you have. Further still, why don't you give Jones Cam Designs a call since he has one of the most accurate modelling programs around. Their number is 704-489-2449

Re: cam spec results
 

I have used this grind

307/317 @.020"
278/264 @.050"
201/197 @.200"
.684"/.660"
106 degree lobe seperation @ 106icl
HXL / RZ lobes
7800rpm shifts
8200rpm past the lights

317/330 @.020"
283/291 @.050"
201/? @.200"
.680"/.632"
106 degree lobe seperation @ 106icl
Lunati
7800rpm shifts
8400rpm past lights

327 small block with 3.25" stroke so in a large engine im not sure what they would turn

How about some more info about your combo? Heads? Bore? Stroke?

Re: cam spec results
 

Are trying to use this cam in a small block chevy? It looks like its a stick shift cam.