CLASS RACER FORUM

CLASS RACER FORUM (https://classracer.com/classforum/index.php)
-   Class Racer Builds (https://classracer.com/classforum/forumdisplay.php?f=58)
-   -   Rear gear selection for Chevy ll 327 stocker build...... (https://classracer.com/classforum/showthread.php?t=46680)

Rusty Davenport 04-08-2013 11:52 AM

Rear gear selection for Chevy ll 327 stocker build......
 
OK lets hear what you got. I have all the numbers for a stick car which is my intent BUT if I have to go automatic weapon 3 speed-----anyone care to suggest a gear ratio for a 327/274 Chevy ll stocker---3005 lbs---30" tire----three speed metric auto ???? I would love to get it right the first time. THANKS for any intelligent replys.

Mike Taylor 3601 04-08-2013 01:39 PM

Re: Rear gear selection for Chevy ll 327 stocker build......
 
MPH X Gear ratio X 336 divided by tire height = RPM.
You'll have to allow for converter slippage someone else could tell you more on that # but probaly 5-8% would be good guess as example figures crossing @ 7100 add 8% would be 7668
Stick car will match formula almost exactly.
Can also figure converter % slippage@ top end w/this formula as close as can for guys without data recorder
Mike Taylor 3601

Jim Hanig 12-31-2013 07:45 PM

Re: Rear gear selection for Chevy ll 327 stocker build......
 
Quote:

Originally Posted by Rusty Davenport (Post 376745)
OK lets hear what you got. I have all the numbers for a stick car which is my intent BUT if I have to go automatic weapon 3 speed-----anyone care to suggest a gear ratio for a 327/274 Chevy ll stocker---3005 lbs---30" tire----three speed metric auto ???? I would love to get it right the first time. THANKS for any intelligent replys.

With a 94 " tire goodyear with a 5.38, 92.5 Hooiser 5.13

Mike Jones 01-23-2014 09:08 PM

Re: Rear gear selection for Chevy ll 327 stocker build......
 
I run 5:13 in my wagon (350/2bbl/Glide) in P/SA @ 3850 lbs or so
Its got a 28.5 Goodyear ( I forget the roll out)
One friend runs (350/4bbl/Metric200) 69 Camaro in G/SA uses 5:13 with 30.0 ( Hoosier, I think)
Another friend 350/2bbl 69 Camaro M/Stick uses 5:13 with 30.0 M/T
Don`t have roll out #`s for those
Most people I talk to that run SBC Stockers run 5:13`s
Just my two cents
Good luck

ron mattson 01-24-2014 12:13 AM

Re: Rear gear selection for Chevy ll 327 stocker build......
 
Twist the spine outta the old girl!!!

Mike Jones 01-24-2014 12:50 AM

Re: Rear gear selection for Chevy ll 327 stocker build......
 
Quote:

Originally Posted by ron mattson (Post 417831)
twist the spine outta the old girl!!!

lol

Mark Lewis 01-24-2014 12:08 PM

Re: Rear gear selection for Chevy ll 327 stocker build......
 
Might be better off with a GOOD powerglide

Joe DeMarzo 01-24-2014 02:18 PM

Re: Rear gear selection for Chevy ll 327 stocker build......
 
I am inclined to agree with Mr. Lewis. Car is really light and in testing not much difference but consistency.

brent flynn 01-25-2014 03:24 PM

Re: Rear gear selection for Chevy ll 327 stocker build......
 
Quote:

Originally Posted by Mike Taylor 3601 (Post 376764)
MPH X Gear ratio X 336 divided by tire height = RPM.
You'll have to allow for converter slippage someone else could tell you more on that # but probaly 5-8% would be good guess as example figures crossing @ 7100 add 8% would be 7668
Stick car will match formula almost exactly.
Can also figure converter % slippage@ top end w/this formula as close as can for guys without data recorder
Mike Taylor 3601

My car... 122.3x4.11x336 devided by 30''= 5629... i trap at 5800...Id say my converter is locked up pretty good... 3% roughly... This is not my stocker combo... Not sure what to expect from that...


All times are GMT -4. The time now is 02:59 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2025, vBulletin Solutions Inc.
Copyright Class Racer.com. All Rights Reserved. Designated trademarks and brands are the property of their respective owners.