Dust Boot - Upper Ball Joint Cover for QA1 1972 Chevelle GM
 

Hey Everybody,

According to QA1 tech, they don't supply or make a dust boot or cover that fits the their ball joints for stock A arms.

Any ideas?

Thanks, Craig

Re: Dust Boot - Upper Ball Joint Cover for QA1 1972 Chevelle
 

Dorman products makes universal replacements . Can be found at any parts store .

Re: Dust Boot - Upper Ball Joint Cover for QA1 1972 Chevelle
 

I believe we're talking about extended length ball joints .Good luck even mentioning them at any auto parts store,..in today's world.

Re: Dust Boot - Upper Ball Joint Cover for QA1 1972 Chevelle
 

This one work?

https://qa1.net/universal-ball-joint...YOnMp2kHehC3K4

Re: Dust Boot - Upper Ball Joint Cover for QA1 1972 Chevelle
 

Hey Guys,

Thanks, I was looking for a better lasting than dorman.

Crisco - that's what I ordered the first time as I called the tech department to double check for them to tell me that they would work. The base id is too small and then called again - I was told they wouldn't fit and check with Moog, etc - he didn't know.

I politely suggested to him to put on the website and the instructions need to be corrected as they recommend that part. Just want the change to happen not to be a jerk.

Thanks, Craig

Re: Dust Boot - Upper Ball Joint Cover for QA1 1972 Chevelle
 

Craig, I used boots from Energy Suspension for the extended upper ball joints on a Camaro/Nova application. Worked great. -Al

Re: Dust Boot - Upper Ball Joint Cover for QA1 1972 Chevelle
 

I would be happy with the stock length boot as they will function the same.

Alan, would those work with the 72 Chevelle too?

Thanks, Craig

Re: Dust Boot - Upper Ball Joint Cover for QA1 1972 Chevelle
 

Thanks Guys

I was able to find some boots through Energy Suspension.

Craig