SBC main bearing/spacers
 

small journal going into large journal block....where can i find them? tks

Re: SBC main bearing/spacers
 

Use to run king spacers in the 67 302 car, not sure they still make them.

Randy Wells
I/S 5628

Re: SBC main bearing/spacers
 

Race Engineering out of Florida was the last ones to make them. I believe they stopped because of a large run of spacers that where not sized correctly. They were useable with a little extra work. They may still have some of those on the shelf.

Re: SBC main bearing/spacers
 

Clevite still makes the complete thicker bearing so you dont have to use spacers.

https://www.summitracing.com/parts/cle-ms1110h

Re: SBC main bearing/spacers
 

Only works if your crank is standard journal size.

Re: SBC main bearing/spacers
 

5620 Comp Cams still available. I think they are made by King but I don't recall the King number.
Sorry, that was for large journal mains to 400 mains. I'll check on lg journal to small journal.

Re: SBC main bearing/spacers
 

Radar has some spacers
Dom

Re: SBC main bearing/spacers
 

https://raceeng.com/race-engineering...ck-set-bs-327/

or

https://akerlychilds.com/

Re: SBC main bearing/spacers
 

I have a NEW set of Clevite MS1110H-1 for 283 main into 350 main block

Mike

Re: SBC main bearing/spacers
 

yes indeed they have them, separate spacer and use whichever bearing you wish. perfect ! now to find a sj rear main seal adaptor...thankyou for the help !