CLASS RACER FORUM - View Single Post

Chad E532 · 01-15-2009, 09:40 PM

Thanks SS3011,
I am running a TCI deep cast pan but with a stock dip stick. I typically run the fluid at the "add a pint" mark but maybe that is too high.

I am going to have to pull it out and replace the front pump gasket and seal just to be sure and then I can run a tap into the vent hole to add some plumbing.

01-15-2009, 09:40 PM	#3
Chad E532 Member Join Date: Jul 2008 Location: Lindstrom MN Posts: 156 Likes: 7 Liked 54 Times in 7 Posts	Re: TH350 Blowing Fluid Thanks SS3011, I am running a TCI deep cast pan but with a stock dip stick. I typically run the fluid at the "add a pint" mark but maybe that is too high. I am going to have to pull it out and replace the front pump gasket and seal just to be sure and then I can run a tap into the vent hole to add some plumbing.