CLASS RACER FORUM - View Single Post

Rich Biebel · 01-25-2009, 06:54 PM

Hello Jason...remember me? I ran the stock distributer...just removed all the optispark stuff and added the MSD cap and rotor. I used a crank trigger and did not feed that trigger signal into the ECU. I ran the timing locked out just for simplicity and ran an MSD digital 6 and also an MSD 7Al2 for a while. I have no experience with the MSD distributer for an LT-1 but it sure does sound like it is the trouble as Woodro says.....

01-25-2009, 06:54 PM	#3
Rich Biebel VIP Member Join Date: Jun 2007 Location: Northern New Jersey suburbs Posts: 2,314 Likes: 25 Liked 544 Times in 213 Posts	Re: LT1 Ignition problem Hello Jason...remember me? I ran the stock distributer...just removed all the optispark stuff and added the MSD cap and rotor. I used a crank trigger and did not feed that trigger signal into the ECU. I ran the timing locked out just for simplicity and ran an MSD digital 6 and also an MSD 7Al2 for a while. I have no experience with the MSD distributer for an LT-1 but it sure does sound like it is the trouble as Woodro says..... __________________ Rich Biebel S/C 1479 Stock 147R