CLASS RACER FORUM - View Single Post - when swapping out rod bolts from stock to ARP

Alan Roehrich · 09-28-2009, 06:59 PM

Clevite makes a special bearing for the "cracked rod" in the LS-1, and the regular small block. It is 0.001" bigger on the OD. Made especially for rods that cannot be cut on the cap or the rod.

09-28-2009, 06:59 PM	#7
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,105 Likes: 1,564 Liked 1,789 Times in 408 Posts	Re: when swapping out rod bolts from stock to ARP Clevite makes a special bearing for the "cracked rod" in the LS-1, and the regular small block. It is 0.001" bigger on the OD. Made especially for rods that cannot be cut on the cap or the rod. __________________ Alan Roehrich 212A G/S