CLASS RACER FORUM - View Single Post

Adger Smith · 05-20-2007, 10:03 AM

SST4530,
I have found the 40 spline MW & the 40 spline Strange to be the same. It is the 35 spline that have the different pitch. There is a difference in the way the strange & M/W spools are splined. M/W uses a full, Completly through, spline & Strange only splines the crnter part of the spool. With a 40 spline Strange you have to have Axles that meet or butt in the center of the spool. With M/W you can use axels that have some space in the center. I have M/W 40 spline gun drilled axels in my car that are centered in the spool. I altenate between a Strange 12 bolt drop out & the 9" M/W with no problems. Hope this helps.

Adger Smith

05-20-2007, 10:03 AM	#10
Adger Smith VIP Member Join Date: Dec 2001 Location: Texarkana Ark/TX Posts: 2,360 Likes: 447 Liked 689 Times in 267 Posts	SST4530, I have found the 40 spline MW & the 40 spline Strange to be the same. It is the 35 spline that have the different pitch. There is a difference in the way the strange & M/W spools are splined. M/W uses a full, Completly through, spline & Strange only splines the crnter part of the spool. With a 40 spline Strange you have to have Axles that meet or butt in the center of the spool. With M/W you can use axels that have some space in the center. I have M/W 40 spline gun drilled axels in my car that are centered in the spool. I altenate between a Strange 12 bolt drop out & the 9" M/W with no problems. Hope this helps. Adger Smith __________________ Adger Smith (Former SS)