CLASS RACER FORUM - View Single Post

THE LEGEND · 07-20-2011, 10:21 AM

Years ago I made a bracket that bolted to the back carb bolt, I then took a cariage bolt ground the end flat and ran it through the brack with a jam nut on both sides. The carb linkage would hit the bolt keeping it from opening all the way. It was good for about 2 tenths in the 1/8th mile.

I think Moroso made something similar for a while. Don't know if they still do.

Chip

07-20-2011, 10:21 AM	#4
THE LEGEND VIP Member Join Date: Aug 2002 Location: Fayetteville, n.c. Posts: 1,411 Likes: 0 Liked 1 Time in 1 Post	Re: Throttle Stop Question Years ago I made a bracket that bolted to the back carb bolt, I then took a cariage bolt ground the end flat and ran it through the brack with a jam nut on both sides. The carb linkage would hit the bolt keeping it from opening all the way. It was good for about 2 tenths in the 1/8th mile. I think Moroso made something similar for a while. Don't know if they still do. Chip