CLASS RACER FORUM - View Single Post - Where do I find a 9" 5.00 or 5.14 Pro Gear with a big pinion

Jamie Greening · 10-19-2011, 12:43 PM

The only thing out there with a big pinion in that ratio is a ten inch gear Tom's gears makes. All the 1/8 mile promods run them. They come in 5.00 and 5.14 require a big bearing case and a spacer under the pinion support. Also mark williams makes a 32 spline gear alot of the pro stock guy run but requires more special parts to make work. Good luck. Forgot Tom's 10 inch gear is $1200.00 a set.

10-19-2011, 12:43 PM	#10
Jamie Greening Junior Member Join Date: Jun 2007 Posts: 45 Likes: 0 Liked 0 Times in 0 Posts	Re: Where do I find a 9" 5.00 or 5.14 Pro Gear with a big pi The only thing out there with a big pinion in that ratio is a ten inch gear Tom's gears makes. All the 1/8 mile promods run them. They come in 5.00 and 5.14 require a big bearing case and a spacer under the pinion support. Also mark williams makes a 32 spline gear alot of the pro stock guy run but requires more special parts to make work. Good luck. Forgot Tom's 10 inch gear is $1200.00 a set. Last edited by Jamie Greening; 10-19-2011 at 12:45 PM.