CLASS RACER FORUM - View Single Post - 12 Bolt Pinion Depth---Unmarked from Manufacturer

Alan Roehrich · 10-24-2011, 05:39 PM

Start with an 0.035" shim between the pinion gear and the bearing.

There is no standard depth, as depth is the opinion of the operator who runs the gears on a Gleason machine.

If there is no backlash spec given, start with 0.008".

10-24-2011, 05:39 PM	#2
Alan Roehrich Veteran Member Join Date: May 2006 Location: Murfreesboro TN Posts: 5,123 Likes: 1,580 Liked 1,873 Times in 422 Posts	Re: 12 Bolt Pinion Depth---Unmarked from Manufacturer Start with an 0.035" shim between the pinion gear and the bearing. There is no standard depth, as depth is the opinion of the operator who runs the gears on a Gleason machine. If there is no backlash spec given, start with 0.008". __________________ Alan Roehrich 212A G/S