[Ben Kallies]

67camaroracer,
-coil is mounted on the firewall. No feed-through. Already replaced the coil and wires.

goinbroke2,
- car starts right up and fuel flow is smooth out of the squirters. Fuel pressure gauge is rock steady.
- oil pan is the same as dyno, and oil pressure is good.
- lifted the engine in the car via a carb-plate
- break-in springs were changed on the dyno
- while I haven't hooked up a vacuum gauge yet, I've checked for leaks visually. The engine is running rich as opposed to lean, so I don't suspect a vacuum leak. The unburned fuel brings tears to my eyes when it's running, and the plugs are all over the map, but mostly dark.

-Ben