View Single Post
Old 06-16-2012, 02:17 PM   #5
Alan Roehrich
Veteran Member
 
Alan Roehrich's Avatar
 
Join Date: May 2006
Location: Murfreesboro TN
Posts: 5,106
Likes: 1,564
Liked 1,789 Times in 408 Posts
Default Re: TRW piston clearance?

They seem to "like" about 0.004" to 0.006" on a 4.0" to 4.125" bore size.

The most important thing to know about those is the pin is not great, and the pin fit is too tight. Replace the pin if possible, and open the pin clearance up by about 0.0002 to 0.0005" from where it starts. Way too many of those things have seized a pin, with ugly results.
__________________
Alan Roehrich
212A G/S
Alan Roehrich is offline   Reply With Quote