View Single Post
Old 04-13-2014, 04:10 PM   #78
brent flynn
Senior Member
 
brent flynn's Avatar
 
Join Date: Apr 2011
Location: Middletown, IN
Posts: 593
Likes: 0
Liked 0 Times in 0 Posts
Default Re: Update E-F/SA Bird Build...

Hey Dave...yea.. not what i was hoping for...but, doubt there is much damage... I will leak down, also, check carb, to make sure i didnt suck up something, after all the fuel system work... i did flush it, but you never know. Would be great if its just in the fuel system... but i'm doubting that ... will know more soon as i check compression...i have to get leak down guage from my buddy, but i do have a real nice compression guage, and it should point to a problem, if its big enough.... oil pressure is good, no leaks in the engine, and it fires right up, but you can tell it has lost a cyiinder or its running so lean, that its missing... will keep you posted!
__________________
1968 Bird/TRW 455/Home ported 13's, '70 Qjet,Holley Street Dominator manifold, Comp Solid FT, 10.817/122.30/1.440
Workin' on E/SA combo 3119 E/SA
brent flynn is offline   Reply With Quote