CLASS RACER FORUM - View Single Post

Jim Wahl · 10-01-2014, 10:58 PM

Took it to Cummins/Onan in Orlando. They found it to be a bad bearing on the winding shaft. They had to completely tear the unit apart. They were good to me and did it under warrantee. It would have been $1100. Got it back and first time out it quit after exactly one hour of work. Took it back and the fuel pump was bad. They replaced the pump and filter. $349. I haven't taken the RV out since then. Just bought an extended warrantee from Good Sams. It will probably come in handy. Jim

.Bill, I found a circuit board on ebay for $325 from a dealer out West. Didn't need it and they took it back!

.

10-01-2014, 10:58 PM	#10
Jim Wahl Veteran Member Join Date: Jan 2002 Location: Central Florida Posts: 5,845 Likes: 672 Liked 683 Times in 129 Posts	Re: Onan Q4000 genset problem Took it to Cummins/Onan in Orlando. They found it to be a bad bearing on the winding shaft. They had to completely tear the unit apart. They were good to me and did it under warrantee. It would have been $1100. Got it back and first time out it quit after exactly one hour of work. Took it back and the fuel pump was bad. They replaced the pump and filter. $349. I haven't taken the RV out since then. Just bought an extended warrantee from Good Sams. It will probably come in handy. Jim .Bill, I found a circuit board on ebay for $325 from a dealer out West. Didn't need it and they took it back! . __________________ Jim Wahl....NHRA #2239 S/SS - IHRA # 8 Stock, D2 Stock Champion (forever I guess) 2019 Baby Gators Stock Champion 2009 NHRA D2 National Open Stock Champion 1982 NHRA D2 West Palm Beach LDRS SS Runner Up Past President, Southern Stock / Super Stock Association. Last edited by Jim Wahl; 10-01-2014 at 11:00 PM.