Quote:
Originally Posted by HandOverFist
That's good because this one no longer has an air bag either. 
Got those 4-cylinder springs today...I'll tackle those this weekend. |
If you have never replaced the front coil springs on a Ford Fox body, be prepared to scratch your head a few times.Unless you cut the old coils with a torch, and are installing lowering springs (shorter free length), it can be a bitc%! If you really want to have some "fun", try installing a pair of un cut Moroso drag springs! It seems that nobody has the correct special spring compressor, so I found it easier (make that somewhat less difficult), to unbolt the 2 large inner control arm bolts, and use a floor jack under the control arm. as long as the engine is still in the car, this method works fairly well. Of course trying to re install those lower control arm bolts afterwards will be a pain.