I noticed that several years but it is wrong! All Boss 302 used the 5.15 rod which is actually the 289hp Rod the 5.090 was used in all 302 production engines.
V
Quote:
Originally Posted by FireSale
For once, the guide is correct on the rod lengths. The 351M had a de-stroked crank and pistons with a taller compression height to bring the cid down to 351. It was built until 1982 and was Ford's last pushrod production engine.
According to the guide the 1970 BOSS 302 had 5.090 rods, Same as the regular 302. It's not perfect.
Disclaimer: I'm no expert, just a good researcher.
This is Bill's build thread. I'm going to leave it to him as the owner. I'm talking too much...
Dale
|