CLASS RACER FORUM - View Single Post

Jim Blankenship · 12-24-2007, 05:40 PM

the push rod isn't hitting till 3" from floor ?
should hit with just 1/2 " down any closer it won't let mc piston to fully return

also take the prop valve out till you have brakes blead.
i put one on johns car when went aftermarket 4 wheel disk had LOTS of prob's, it in box in trailer now
car stops good no wheel lock up
it had a soft pedel with the prop valve on it
hope this helps
jim

12-24-2007, 05:40 PM	#10
Jim Blankenship Member Join Date: Jun 2007 Location: nashville tn Posts: 149 Likes: 0 Liked 0 Times in 0 Posts	Re: brake problem the push rod isn't hitting till 3" from floor ? should hit with just 1/2 " down any closer it won't let mc piston to fully return also take the prop valve out till you have brakes blead. i put one on johns car when went aftermarket 4 wheel disk had LOTS of prob's, it in box in trailer now car stops good no wheel lock up it had a soft pedel with the prop valve on it hope this helps jim __________________ Jim Blankenship 3086 STK