CLASS RACER FORUM - View Single Post

HP HUNTER · 03-21-2017, 09:13 PM

I proceeded with the valve job, and of course after setting my valve depths there was one problem child, a seat that would not come in at the proper height after replacing all the guides, good thing I had seats made to fix this potential problem. I installed a intake seat, problem fixed. Valve job is done, CCs will be set at 59.5.

03-21-2017, 09:13 PM	#52
HP HUNTER Senior Member Join Date: Feb 2012 Location: Colorado Springs Colorado/Thousand Oaks Ca Posts: 656 Likes: 86 Liked 373 Times in 129 Posts	Re: 1971 Buick 455 GS F/SA G/SA Build I proceeded with the valve job, and of course after setting my valve depths there was one problem child, a seat that would not come in at the proper height after replacing all the guides, good thing I had seats made to fix this potential problem. I installed a intake seat, problem fixed. Valve job is done, CCs will be set at 59.5. Attached Thumbnails Last edited by HP HUNTER; 03-21-2017 at 09:36 PM.